DEUTZ 912 CYLINDERS
- dstar5000
- Posts: 4555
- Joined: Tue Feb 12, 2002 12:01 am
Re: DEUTZ 912 CYLINDERS
Got a linky?
Don
Don
"Let me say it as simply as I can: transparency and the rule of law will be the touchstones
of this presidency,".. Barack Obama January 21, 2009, 30 minutes before he signed the law
sealing all his personal information....
of this presidency,".. Barack Obama January 21, 2009, 30 minutes before he signed the law
sealing all his personal information....
- Piledriver
- Moderator
- Posts: 22520
- Joined: Sat Feb 16, 2002 12:01 am
Re: DEUTZ 912 CYLINDERS
Lees engine stand build thread:
http://www.shoptalkforums.com/viewtopic ... 8&t=140736
http://www.shoptalkforums.com/viewtopic ... 8&t=140736
Addendum to Newtons first law:
zero vehicles on jackstands, square gets a fresh 090 and 1911, cabby gets a blower.
EZ3.6 Vanagon after that.(mounted, needs everything finished) then Creamsicle.
zero vehicles on jackstands, square gets a fresh 090 and 1911, cabby gets a blower.
EZ3.6 Vanagon after that.(mounted, needs everything finished) then Creamsicle.
- dstar5000
- Posts: 4555
- Joined: Tue Feb 12, 2002 12:01 am
Re: DEUTZ 912 CYLINDERS
Thanks guys! I posted these and other photos over there!
Don
Don
"Let me say it as simply as I can: transparency and the rule of law will be the touchstones
of this presidency,".. Barack Obama January 21, 2009, 30 minutes before he signed the law
sealing all his personal information....
of this presidency,".. Barack Obama January 21, 2009, 30 minutes before he signed the law
sealing all his personal information....
-
- Posts: 620
- Joined: Fri Aug 26, 2011 10:01 am
Re: DEUTZ 912 CYLINDERS
Hi there, have ya got any futher with this build,for my next build am gunna try some of these Deutz cylinders.66 x 107
- dstar5000
- Posts: 4555
- Joined: Tue Feb 12, 2002 12:01 am
Re: DEUTZ 912 CYLINDERS
Yes, I got the rods narrowed, then had to narrow the Calico coated bearings because DPR
offset ground the crank with a generous radius for strength.
Comparison photo:
Chamfering rod after narrowing:
Trimming the Calico coated bearings:
SWINGING:
Don
offset ground the crank with a generous radius for strength.
Comparison photo:
Chamfering rod after narrowing:
Trimming the Calico coated bearings:
SWINGING:
Don
You do not have the required permissions to view the files attached to this post.
"Let me say it as simply as I can: transparency and the rule of law will be the touchstones
of this presidency,".. Barack Obama January 21, 2009, 30 minutes before he signed the law
sealing all his personal information....
of this presidency,".. Barack Obama January 21, 2009, 30 minutes before he signed the law
sealing all his personal information....
-
- Posts: 620
- Joined: Fri Aug 26, 2011 10:01 am
Re: DEUTZ 912 CYLINDERS
very nice.that crank looks tuff compared the STD 1. when do ya recon its gunna run.a youtube clip would be good.
- dstar5000
- Posts: 4555
- Joined: Tue Feb 12, 2002 12:01 am
Re: DEUTZ 912 CYLINDERS
Checking my previous case clearancing job in the am. Probably have to touch
a few spots here and there but I originally was going for an 86mm crank, so I
might luck out and not have to do any more!
THEN I can check cam clearance......might be awhile, not getting in a hurry on this one!
Don
a few spots here and there but I originally was going for an 86mm crank, so I
might luck out and not have to do any more!
THEN I can check cam clearance......might be awhile, not getting in a hurry on this one!
Don
"Let me say it as simply as I can: transparency and the rule of law will be the touchstones
of this presidency,".. Barack Obama January 21, 2009, 30 minutes before he signed the law
sealing all his personal information....
of this presidency,".. Barack Obama January 21, 2009, 30 minutes before he signed the law
sealing all his personal information....
-
- Posts: 620
- Joined: Fri Aug 26, 2011 10:01 am
Re: DEUTZ 912 CYLINDERS
Yep,always best to take ya time,Ive done mock up work on mine thought it was right,gone back to it after the week end only to find sumat not right. treble checking everything. c ya
-
- Posts: 2433
- Joined: Wed Apr 13, 2011 1:01 pm
Re: DEUTZ 912 CYLINDERS
Are you getting the rods end to end balanced after?
- dstar5000
- Posts: 4555
- Joined: Tue Feb 12, 2002 12:01 am
Re: DEUTZ 912 CYLINDERS
GETTING? NO!
Am I DOING them?
YES!
Actually, I DID them yesterday! .4 grams from lightest to heaviest.....
Don
Am I DOING them?
YES!
Actually, I DID them yesterday! .4 grams from lightest to heaviest.....
Don
"Let me say it as simply as I can: transparency and the rule of law will be the touchstones
of this presidency,".. Barack Obama January 21, 2009, 30 minutes before he signed the law
sealing all his personal information....
of this presidency,".. Barack Obama January 21, 2009, 30 minutes before he signed the law
sealing all his personal information....
- dstar5000
- Posts: 4555
- Joined: Tue Feb 12, 2002 12:01 am
Re: DEUTZ 912 CYLINDERS
Today, I made a gear puller to take th gear off the old crank:
EASY PEASY and no damage to gear!
JOB DONE!
Don
EASY PEASY and no damage to gear!
JOB DONE!
Don
You do not have the required permissions to view the files attached to this post.
"Let me say it as simply as I can: transparency and the rule of law will be the touchstones
of this presidency,".. Barack Obama January 21, 2009, 30 minutes before he signed the law
sealing all his personal information....
of this presidency,".. Barack Obama January 21, 2009, 30 minutes before he signed the law
sealing all his personal information....
-
- Posts: 2433
- Joined: Wed Apr 13, 2011 1:01 pm
Re: DEUTZ 912 CYLINDERS
dstar5000 wrote:GETTING? NO!
Am I DOING them?
YES!
Actually, I DID them yesterday! .4 grams from lightest to heaviest.....
Don
Cool!
how did you do it?
took me ages to perfect my jig to balance mine
- dstar5000
- Posts: 4555
- Joined: Tue Feb 12, 2002 12:01 am
Re: DEUTZ 912 CYLINDERS
I made a swing and used my Craftsman laser level to set it the same everytime!
Don
Don
"Let me say it as simply as I can: transparency and the rule of law will be the touchstones
of this presidency,".. Barack Obama January 21, 2009, 30 minutes before he signed the law
sealing all his personal information....
of this presidency,".. Barack Obama January 21, 2009, 30 minutes before he signed the law
sealing all his personal information....
- dstar5000
- Posts: 4555
- Joined: Tue Feb 12, 2002 12:01 am
Re: DEUTZ 912 CYLINDERS
EVERYTHING TURNS WITH NO INTERFERENCE!
Cam is only .500 lift so the rod misses it by .035".
Measuring to cut the cyls to length now:
DON
Cam is only .500 lift so the rod misses it by .035".
Measuring to cut the cyls to length now:
DON
You do not have the required permissions to view the files attached to this post.
"Let me say it as simply as I can: transparency and the rule of law will be the touchstones
of this presidency,".. Barack Obama January 21, 2009, 30 minutes before he signed the law
sealing all his personal information....
of this presidency,".. Barack Obama January 21, 2009, 30 minutes before he signed the law
sealing all his personal information....
-
- Posts: 7404
- Joined: Sat Mar 10, 2001 12:01 am
Re: DEUTZ 912 CYLINDERS
With your budget it seems you would have LN cylinders.
I really like the fins on the square tractor ones! When I finish with my 103 Eurorace cylinders I may go this route.
edit;
Damn those cylinder bases on the case are thin. My 103 bored case has about twice that material remaining.
I really like the fins on the square tractor ones! When I finish with my 103 Eurorace cylinders I may go this route.
edit;
Damn those cylinder bases on the case are thin. My 103 bored case has about twice that material remaining.
Steve
My Baja Build
My Baja Build