Figured this was a good question for this place...
I'm continuing to put together a full-house 2270 built around a real exhaust and whatnot.
Should be making 200HP or more, if goes as planned.
This means it will be getting an upgraded clutch..
It uses a 914 flywheel -215mm "Porche type", not Bus.
The P-car world seems to have a few different kits,
All of which are $600+
https://www.pelicanparts.com/catalog/Su ... .htm#item0
The Type4Store seems to offer a 6-puck disk as the solution?
https://type4store.com/products/clutch- ... -disc.html
Kennedy sells a 215 P-Spec Stage 1 for $310, reportedly good to 230 ft./lbs. or so.
Also saw someone (Wally?) with some Sachs 'Super Duty'(?) P/P somewhere once?
Who has crossed this bridge and lived to tell the tale?
Would like to do this only once, since it's all to be balanced as a unit..
Thanks!
215 Heavy Pressure Plate?
- Clatter
- Posts: 2034
- Joined: Sun Apr 28, 2002 1:01 am
215 Heavy Pressure Plate?
Speedier than a Fasting Bullet!
Beginners' how-to Type 4 build thread ---> http://shoptalkforums.com/viewtopic.php?f=1&t=145853
Beginners' how-to Type 4 build thread ---> http://shoptalkforums.com/viewtopic.php?f=1&t=145853
- Bills914-4
- Posts: 105
- Joined: Tue Nov 08, 2005 9:09 am
Re: 215 Heavy Pressure Plate?
Hello Clatter,
I run a rebuilt kep 2 stage , I over tightened clutch cable( dummy me) & bent a few fingers so I
sent it kep for repair , I spoke with a gentlemen named Monte & had him rebuild it to a
stage 2 1/2 ( they dont make a 3 ) I also run a solid center disc ( sprung disc seemed to slip on my setup)
call Jorge at EMW he normaly stocks them, also AA sells them for $270 stage 2, plus there 15% discount
aapistons.com/products/kennedy-stage-2-pressure-plate-porsche-914-215mm
good luck Bill D.
I run a rebuilt kep 2 stage , I over tightened clutch cable( dummy me) & bent a few fingers so I
sent it kep for repair , I spoke with a gentlemen named Monte & had him rebuild it to a
stage 2 1/2 ( they dont make a 3 ) I also run a solid center disc ( sprung disc seemed to slip on my setup)
call Jorge at EMW he normaly stocks them, also AA sells them for $270 stage 2, plus there 15% discount
aapistons.com/products/kennedy-stage-2-pressure-plate-porsche-914-215mm
good luck Bill D.