Estimated horsepower

Do you like to go fast? Well get out of that stocker and build a hipo motor for your VW. Come here to talk with others who like to drive fast.

Moderator: Tom Notch

hotair
Posts: 77
Joined: Tue Feb 05, 2008 4:42 pm

Re: Estimated horsepower

Post by hotair » Thu Jan 04, 2018 10:34 pm

Ok tell me....šŸ˜³
2332
FK43 cam
Eagle 5.4 ā€œ rods
Wiseco pistons
Pauter 1.4 roller rockers
Street eliminator heads 37x44 valves
Twin Weber 44ā€™s

What kind of power will this make???

Thanks....

User avatar
ps2375
Posts: 357
Joined: Mon Aug 18, 2014 10:04 am
Location: Meridian,ID

Re: Estimated horsepower

Post by ps2375 » Thu Jan 04, 2018 11:26 pm

Not that I know anything about that cam, but seems you are missing some additional specs. Like CR, exhaust choice, vent size and any porting anywhere. Definitely more than 100whp, but that could also depend upon who assembles it. I would think an easy 120+ at the wheels.

hotair
Posts: 77
Joined: Tue Feb 05, 2008 4:42 pm

Re: Estimated horsepower

Post by hotair » Fri Jan 05, 2018 4:19 pm

Sorry.....heads are ported and the intakes matched to the ports. The exhaust is 1-5/8 tri-mill. Iā€™m not sure about the vents, the carbs are still in the box from CB. The cr is about 9.5-1 I am also using a pauter dry sump system.

User avatar
ps2375
Posts: 357
Joined: Mon Aug 18, 2014 10:04 am
Location: Meridian,ID

Re: Estimated horsepower

Post by ps2375 » Fri Jan 05, 2018 4:57 pm

I stand by my prediction then, and add that it'll be really fun. My 2087 made 114whp on less compression and with your added cc's and compression..more power should be no problem.

User avatar
Teo1303
Posts: 23
Joined: Fri Jan 26, 2007 7:13 pm
Location: Greece

Re: Estimated horsepower

Post by Teo1303 » Thu Aug 02, 2018 12:43 am

Hell guys ... will you tell me some information for me also???

My engine is going to be with these specs

Full flow engine with 94x78 (2165cc) , FK8 Engle camshaft , 1.4 rockers , 40x35.5 heads , 2dual 40 Dellorto's DRLA
I don't know how much the compression is yet and how much can this engine rev with the stock rods from a 1584cc engine ?? 5,800 RPM is enough or I can go further to 6,500??? What kind of power will this engine make ???

Post Reply