Got my ej20t

[turboedbug]

Ditching the EMS Stinger 4424 ECU ?

yup ya interested?

Sent from my SM-J727T using Tapatalk

[panel]

Nope....Megasquirt guy since 2005.

[turboedbug]

heres the first fitment issue with the stiffy truss bar kit with the subaru engine mount.

looks like i need some different tabs so the clevis dosnt contact the engine bracket.

other than that so far so good.

Sent from my SM-J727T using Tapatalk

[turboedbug]

bam!

Sent from my SM-J727T using Tapatalk

[turboedbug]

alright so after 2 drill bits i got this 4.5" hole knocked out!



Sent from my SM-J727T using Tapatalk

[joelzy]

Nice work!

[turboedbug]

thanks buddy!

i have some more fuel system stuff on the way!

rated for e85! not sure on the pump though o well hahahaha. at least the fuel lines will be good.

Sent from my SM-J727T using Tapatalk

[turboedbug]

mocking up some stuff.

Sent from my SM-J727T using Tapatalk

[turboedbug]

that last pic sucks.

Sent from my SM-J727T using Tapatalk

[surfbeetle]

What kind of fuel pump is that? Was there any welding required? I have a barrel type pump and it's crazy loud. I'm going to reposition mine in an effort to quiet it down but I know that the only real way to make it silent is to put it into the tank. Great work!

[turboedbug]

its a setup from tanksinc.com

i believe the one i got is the 255 lph pump.

i have no clue if its loud or not. i know your looking to quiet things down on your setup.

pretty sure it requires welding.

i havnt finished mine yet.

between working a crap ton and spending time with the fam the beetle has been on the side lines.

hopefully gonna knock out a few things on it tomorrow if time allows between the honey do list and yard work.

Sent from my SM-J727T using Tapatalk

[surfbeetle]

Thank you for the info. My car has taken a decade to get running as it has always taken a back seat to my wife and raising three daughters. Even if I only had time to get out there for a few minutes and do something on the car, it was still progressing.

[turboedbug]

so i fitting uo the subarugears ring and pinion. i am having a few fitment issues.

so with the first photo i have the locking collar installed with the needle bearing.

i go to install the suba spool after inserting the pinsion shaft. the splines protrude.

so if i go ahead and install the washer and nut i wont be able to tighten up the nut against the subaspool it will hit the splines and the spool can move back and forth.

Sent from my SM-J727T using Tapatalk

[turboedbug]

am i missing something here?

i have watched the subarugears video.

it dosnt show thr collar being installed onto the pinion shaft. he goes directly to installing the shaft then putting on the suba spool, washer then nut.



Sent from my SM-J727T using Tapatalk

[bad62bug]

is yours the older style without the bushing for the suba spool end of the shaft?