Page 1 of 4
My '74 2.0 Restoration introduction... Dyno results!
Posted: Thu Jan 31, 2013 12:40 pm
by falcor
Got it home last monday...barely had time to look at it becuase of work....
http://www.rejsa.com/im/user/395/2013-0 ... g_5047.jpg
Spec's:
Front glasfibre hood
Rear glasfibre hood
Front GF bumper (cracked)
Rear GF bumper
Rollcage
Old five point harnesses, will probably be discarded.
Three point belts will be installed (needed to pass registration)
Rebound adjustable red Koni's front and rear
Springs "140 lb Weltmeister"
Engine overhauled 2001:
"Euro" pistons
Camshaft, unknown spec.
Overhauled heads with new valves and guides
Weltmeister oiltrap
Flywheel lightened 2 kg's
Frontmount oilcoover
External oilfilter
etc....
It's a pretty rough looking car but the plan is to get it registered (ex California car, I got it from Germany)
and then tear it to pieces and do it right, find all rust, fix it and have it resprayed.
Pics will follow tomorrow...
Re: My '74 2.0 Restoration introduction...
Posted: Thu Jan 31, 2013 4:43 pm
by aircooledtechguy
I look forward to seeing your new car. Congrats!!
Re: My '74 2.0 Restoration introduction...
Posted: Thu Jan 31, 2013 5:32 pm
by Piledriver
Welcome to the STF, looking forwards to your build!
Re: My '74 2.0 Restoration introduction...
Posted: Fri Feb 01, 2013 11:35 am
by falcor
Re: My '74 2.0 Restoration introduction...
Posted: Sun Feb 03, 2013 2:56 pm
by aircooledtechguy
That doesn't look too rough. . . I think you and most others have a difference in opinion on what is the true definition of "rough" really is. Looks good!!
Re: My '74 2.0 Restoration introduction...
Posted: Mon Feb 04, 2013 10:01 am
by falcor
aircooledtechguy wrote:That doesn't look too rough. . . I think you and most others have a difference in opinion on what is the true definition of "rough" really is. Looks good!!
It doesn't look half bad from a few meters away but....
Cracked windscreen
Some rust at the righ hand lower corner of the windscreen
Left front fender dented
Front cracked and taped up
Passenger door got a 3 foot scratch
Dash cracked
Rear trunk rusty (inside, middle rear part)
High beams doesn't work
Front fan doesn't work
Most rubbers perished and torn
Needs new carpets and seat covers
...the list goes on and on....but I've got a plan
Re: My '74 2.0 Restoration introduction...
Posted: Mon Oct 21, 2013 8:40 am
by falcor
My car...err body is currently in the bodyshop getting some rust treatment but front edge where the seal for the trunk fits
is badly smashed up and my bodyguy is unsure if he can fix it. $1000 for a new replacement panel is something I want to avoid as long as possible, is there anyone who's got this panel and is willing to part with it for a bit less?
Re: My '74 2.0 Restoration introduction...
Posted: Sun Oct 27, 2013 10:56 pm
by falcor
Problem above kinda sorted with a days work and a gas welder and a competent bodyshop guy. It's not pretty but at least straighter.
Rear suspension reinforcement kit from Tangerine welded in place, she will probably be done this week and then I'll take the body home again and assemble the front for some fine adjustments before I tackle the underside and wheel arches for cleanup and paint prep.
Re: My '74 2.0 Restoration introduction...
Posted: Mon Oct 28, 2013 6:23 am
by falcor
Here's a pic of the chilly morning we rolled off to the bodyshop....
Re: My '74 2.0 Restoration introduction...
Posted: Sun Nov 24, 2013 10:02 pm
by falcor
The car is back home from the body shop, straighter and with less rust and a rear reinforcement kit from Tangerine Racing welded in place. Still alot of work to be done, fixing the surface rust in the center tunnel currently and working my way outwards from there.
http://matsgarage.com/914/DSC00449.JPG
Cant insert the pic since STF's limit on 800 pixels height.
Re: My '74 2.0 Restoration introduction...
Posted: Mon Nov 25, 2013 10:33 am
by E_bug
Such a tease. I love 914s.
Definitely my next project
Re: My '74 2.0 Restoration introduction...
Posted: Sat Jul 26, 2014 9:32 am
by falcor
Got the first paint on the car last week, I'm only doing the areas that will be sortof covered up myself. The outside I will leave to a professional.
More pictures and updates on my website.
http://www.matsgarage.com
Re: My '74 2.0 Restoration introduction...
Posted: Sat Jul 26, 2014 3:39 pm
by Piledriver
Looking great!
I need to start on mine RSN...
Re: My '74 2.0 Restoration introduction...
Posted: Fri Nov 21, 2014 2:22 pm
by falcor
Body is back from the paintshop and today I did some trial reassembly.
Re: My '74 2.0 Restoration introduction...
Posted: Fri Jan 02, 2015 10:34 am
by falcor
All parts back from paint late november.
Rear suspension mounted.
Trialfitting the Cookie cutters.
Mmmm....goodies...