My Megasquirt build, Volksbugly

[volksbugly]

This came in the mail today.
https://picasaweb.google.com/1078300117 ... directlink

Already purchased:
Already installed my LC-1 from innovate (its how I tunned my carb)
http://www.innovatemotorsports.com/xcar ... 262&page=1

Fuel system (return line, pump, filter, regulator) - from Mario
Trigger Wheel - from Mario
sensors - from Mario (CLT, IAT)
http://www.thedubshop.net/

LS2 coils from website -I'll update later with link if anybody wants.
http://www.rrrdynotuning.com/store/#ecw ... uct=548968
CB Performance 40mm F.I. throttle bodies
http://www.cbperformance.com

a custom built wiring harness from Mario.
Injector Dynamics 725cc


I plan to install the Trigger wheel within the next two weeks,
and Install the Fuel system, fuel pump, regulator, filter, return line but not the throttle bodies within the next two weeks,
then get the ECU position sorted.

This is my daily driver, so I do a little each weekend.

[Max Welton]

You'll need a 3-wire TPS. Or did the throttle-bodies come with one?

Max

[supaninja]

Sounds like a solid setup, MS3?

[volksbugly]

@Max The throttle bodies came with a tps, its a 3 wire.
http://www.cbperformance.com/catalog.asp?ProductID=319

@Supaninja
Thanks! yeah is a MS3



future upgrades after I get it tuned and learn how to tune:

oil cooler
Turbo
ID cc1000 injectors
cry02 fuel cooler
water to air intercooler

78.4 x 92mm engine -with all the goodies... (this is a long term build though)

[Max Welton]

Very interesting. The separate page for the 48mm TBs says the TPS must be ordered separately.

http://www.cbperformance.com/catalog.asp?ProductID=412

I'm cogitating on a FI 2110 for my KG, not sure the 40s will flow enough.

I'm really hoping you go first to find that out!

Max

[volksbugly]

Ron (porche megasquirter here) was / is running jevee 43mm on a I think 2184... or something of the likes...
Its the hardest pulling NA car I have ever been in.
I personally think you will LOVE 40 mm,

[Vee Dub Nut]

Looks good! Make sure to keep posting pics and updates.

[supaninja]

Very interesting. The separate page for the 48mm TBs says the TPS must be ordered separately.

http://www.cbperformance.com/catalog.asp?ProductID=412

I'm cogitating on a FI 2110 for my KG, not sure the 40s will flow enough.

I'm really hoping you go first to find that out!

Max

40's are more then enough for a 2110 Max, your still stuck in that carb mentality . 44IDF's only have 36mm venturi's.

[volksbugly]

Oh btw, mine didn't come with the TPS, I had to buy all the extra hardware.
all said and done, I have about 800$ in the throttle bodies, fuel rails, fuel rail holders, tps, linkage hiem joints, and some air cleaner covers (mine were missing)

[volksbugly]

So a quick update:

Had a little vacation,
car is in the shop currently getting 2nd gear repaired.. its warranty work. I'm looking for some fuel line clips. I plan to mount the lines under the body. I think I will go ahead and run two lines, one as a backup. I put out everything in the living room floor. I'll take some pics later tonight when I get home. I got the new pully installed, but can't find the bracket and hall sensor... Time to tear apart the office... (dont have a garage).

Pictures of the goodies soon.

[supaninja]

Oh btw, mine didn't come with the TPS, I had to buy all the extra hardware.
all said and done, I have about 800$ in the throttle bodies, fuel rails, fuel rail holders, tps, linkage hiem joints, and some air cleaner covers (mine were missing)

I won't tell you how much my ITB's costed me but it was a lot less.

[Dale M.]

So a quick update:

Had a little vacation,
car is in the shop currently getting 2nd gear repaired.. its warranty work. I'm looking for some fuel line clips. I plan to mount the lines under the body. I think I will go ahead and run two lines, one as a backup. I put out everything in the living room floor. I'll take some pics later tonight when I get home. I got the new pully installed, but can't find the bracket and hall sensor... Time to tear apart the office... (dont have a garage).

Pictures of the goodies soon.

Tubing clips/clamps

http://www.althafastener.com/Stainless- ... p_202.html
http://www.inlinetube.com/clips%20brake ... /clips.htm
http://www.mrostop.com/clips-c-543_1045_1047.html

Dale

[kuleinc]

Certainly interested in your build did you get it running on MS yet?

[volksbugly]

https://picasaweb.google.com/1078300117 ... 6939243602

not running yet,

Wideband is in, toothed pully is in,

I am doing everything next week since I have a week off paid from work.

Taking over the living room, ya the wife wants to kill me:
https://picasaweb.google.com/1078300117 ... 6939243602

ah and for full sequential you need a cam sensor and a crank sensor, for the crank I did Mario's pully,
for the cam I did CB Cam Sync.. Its pretty heavy duty I thought it would be some plastic thing but its solid billet its probably about 3 to 5 lbs
CB CamSync:
https://picasaweb.google.com/1078300117 ... 6970977218
one negative - the screw heads were partially stripped

Check out the secret Santa gift that was given to me!
http://www.youtube.com/watch?v=jfGfgvZs ... OO8iJZwtKS

[volksbugly]

Well I was lazy during the break, I got the left side throttle body installed, along with my fuel pressure gauge. It was a really tight fit. I had to use a hammer to dent out the sides because the fuel rail is hitting. I ended up having to make trips to the hardware store and VW shop, every time I did that it was 3 hours out of my day. Waking up at 11am didnt help either since it gets dark here at 5pm. The dark doesn't really bother me but by 6pm its cold.

Here are some pics: (If I do this right)

(Sorry I boogered my web album.) !!!

See page 3 or check out the album directly here

https://picasaweb.google.com/1078300117 ... directlink