Megasquirt Injectors Bank 1 and 2 67 Beetle

[bug_n_67]

I'm just getting ready to wire my injector plugs up and wanted to know the way to do it.
Does Bank 1 do one side cylinder 1,2
Bank 2 the other side 3,4
or 1,3 for one Bank and 2,4 for the other Bank.

Thanks
J

[Clonebug]

I wired mine according to Mario's wiring diagram.

As far as I can tell it's 1,2 and 3,4.

He does have 1,3 and 2,4 listed as alternating squirts so you could probably try it either way and see which gives better results.

[andy198712]

How are you splitting the wiring though? I got one wire for bank 1 and one for bank 2... Wondering how to neatly do it ...?

[bug_n_67]

I'm running 4 wires, pin 32,33 for one bank and pin 34, 35 for the other as outlined from MS2 build.

[andy198712]

Hmmmm maybe I need to re look!

[thedrew]

think crank position at TDC
bank1 : 1 & 3
bank2: 2 & 4

[andy198712]

I'm running mine 1&2 and 3&4 and it works....

[Piledriver]

It will work for most definitions of works.
Alternating may not work as well.

Make sure to turn semi-sequential on for consistent injection timing at least.

[andy198712]

Yes but ITBs will never be perfect...? Works well enough for me:)
Turn on semi sequential you say? Will read into that, cheers!

[gtmdriver]

The Beetle firing order is not the same as an inline 4 cylinder engine.

It is

1-4-3-2

so you should wire the injectors so that

Bank 1 is cylinders 1 & 3

Bank 2 is cylinders 2 & 4