DBW air cooled
-
- Posts: 22
- Joined: Sun Aug 28, 2016 2:05 pm
DBW air cooled
sorry i have not post for a long time this site will not let me log in with any of my old user name's bug man nrg or m3d
I have good news we have got the DBW to work on the air cooled vdubs and now i have time on my hands to play with the car i will try to post more
"https://youtu.be/2O1LHcnRtDQ
let me know what you think
I have good news we have got the DBW to work on the air cooled vdubs and now i have time on my hands to play with the car i will try to post more
"https://youtu.be/2O1LHcnRtDQ
let me know what you think
- Jadewombat
- Posts: 1447
- Joined: Sat Jun 22, 2002 12:01 am
Re: DBW air cooled
Interesting, but not the first type 1 DBW. A guy in Brazil posted a few years ago here on STF with a DBW setup. I'll see if I can find the post.
Good looking setup though. Specs??
Good looking setup though. Specs??
- Jadewombat
- Posts: 1447
- Joined: Sat Jun 22, 2002 12:01 am
Re: DBW air cooled
Couldn't find it on STF, but it's over on TS:
http://www.thesamba.com/vw/forum/viewtopic.php?t=482104
http://www.thesamba.com/vw/forum/viewtopic.php?t=482104
- ps2375
- Posts: 397
- Joined: Mon Aug 18, 2014 8:04 am
Re: DBW air cooled
That sounds like the biggest waste of time, money and resources to me. DBW, along with PS and many other so-called advancements aren't needed or called for and serve no real purpose. Other than to cause things like toyota's unintended acceleration problems(and now they have steer by wire on some cars). But, that is my opinion.
Why would you need/want to over complicate such a simple thing.
Why would you need/want to over complicate such a simple thing.
- Jadewombat
- Posts: 1447
- Joined: Sat Jun 22, 2002 12:01 am
Re: DBW air cooled
The VAG group started DBW in the late 90s to give them more engine control from what I understand of it. You could turn the key with the pedal to the floor or keep holding on the key and it had absolutely no effect on the presets in the ECU to actually start the car. Which in turn gives the manufacturers more control over reliability, less warranty issues of people who still think there's a four-barrel and a choke or whatever under the hood--as well as a better fit to the engine maps with DBW across the rev range, a hair better mileage, hp, etc.
I had a new GTI in 2007 and I really didn't like the feel of the DBW on that car. It was way too sensitive, I don't know, just felt really stabby driving around town or cruising. Full throttle or hard gassing it was fine of course.
My current Chevy Colorado DBW is nice though.
I agree, it's probably overkill setting DBW up on an air-cooled VW but please prove us wrong if there's a significant amount of driveability, hp, and mileage to be gained.
I had a new GTI in 2007 and I really didn't like the feel of the DBW on that car. It was way too sensitive, I don't know, just felt really stabby driving around town or cruising. Full throttle or hard gassing it was fine of course.
My current Chevy Colorado DBW is nice though.
I agree, it's probably overkill setting DBW up on an air-cooled VW but please prove us wrong if there's a significant amount of driveability, hp, and mileage to be gained.
- Piledriver
- Moderator
- Posts: 22520
- Joined: Sat Feb 16, 2002 12:01 am
Re: DBW air cooled
For ITBs it could be an awesome win.
MS3 (maybe 2?) supports it these days via a GM controller for all the failsafe/liability reasons you could imagine.
For tuning purposes a huge TB can be beneficial for high RPM, but turns the throttle into an on/off switch.
... but there are other ways to achieve the same effect ...slot-fed plenums come to mind, the slot and feed area is the plenum entry, decouples actual TB size from plenum tuning.
(See: ~any racing Audi intake manifold for the last ~20 years)
MS3 (maybe 2?) supports it these days via a GM controller for all the failsafe/liability reasons you could imagine.
For tuning purposes a huge TB can be beneficial for high RPM, but turns the throttle into an on/off switch.
... but there are other ways to achieve the same effect ...slot-fed plenums come to mind, the slot and feed area is the plenum entry, decouples actual TB size from plenum tuning.
(See: ~any racing Audi intake manifold for the last ~20 years)
Addendum to Newtons first law:
zero vehicles on jackstands, square gets a fresh 090 and 1911, cabby gets a blower.
EZ3.6 Vanagon after that.(mounted, needs everything finished) then Creamsicle.
zero vehicles on jackstands, square gets a fresh 090 and 1911, cabby gets a blower.
EZ3.6 Vanagon after that.(mounted, needs everything finished) then Creamsicle.
-
- Posts: 22
- Joined: Sun Aug 28, 2016 2:05 pm
Re: DBW air cooled
the guy that did this was part cable and part dbw this one is 100% dbw i usred all oem vw parts .My new set up will not let me use a cable this is why i did this .I also did dbw with parts from Jenvey parts and it work well this is why i did this project
- Jadewombat
- Posts: 1447
- Joined: Sat Jun 22, 2002 12:01 am
Re: DBW air cooled
Pile, so you're saying your going to step up and configure the world's first air-cooled v-dub with variable intake runners??
- Piledriver
- Moderator
- Posts: 22520
- Joined: Sat Feb 16, 2002 12:01 am
Re: DBW air cooled
Unlikely, hard to fabricate in back yard, but it may have variable plenum inlet slot areas, which should have a very similar effect.Jadewombat wrote:Pile, so you're saying your going to step up and configure the world's first air-cooled v-dub with variable intake runners??
Addendum to Newtons first law:
zero vehicles on jackstands, square gets a fresh 090 and 1911, cabby gets a blower.
EZ3.6 Vanagon after that.(mounted, needs everything finished) then Creamsicle.
zero vehicles on jackstands, square gets a fresh 090 and 1911, cabby gets a blower.
EZ3.6 Vanagon after that.(mounted, needs everything finished) then Creamsicle.
-
- Posts: 22
- Joined: Sun Aug 28, 2016 2:05 pm
Re: DBW air cooled
Unlikely, hard to fabricate in back yard, but it may have variable plenum inlet slot areas, which should have a very similar effect.
i like the sound of that .If only you was in Florida i would let you do this in the shop i think this would be a good
thing .do you have plans for this ???
i like the sound of that .If only you was in Florida i would let you do this in the shop i think this would be a good
thing .do you have plans for this ???
- Jadewombat
- Posts: 1447
- Joined: Sat Jun 22, 2002 12:01 am
Re: DBW air cooled
I had a Mistu. 3.0l. V6 at one point in time with this setup. My friend said full-throttle and it would just peen open butterflies to redirect the air from long to short runners, IIRC. BMW had (probably still does) an intricate setup of a vortex of runners on their 7 series motors in the early to mid-90s which looked not unlike a cross-section of a nautilus type shell.
Thinking out loud, the transition switching from short to long runners probably isn't very long at all but would make tuning a bit interesting with the sudden change in MAP pressure (assuming that's what the ECU is referencing and not a hot-wire setup, etc.). Basically just two settings with the additional butterflies like Pile was saying, on-off, etc. Maybe it's not too drastic a transition though thinking of all of those millions of cars with progressive throttle bodies (eg. VAG cars)??
Thoughts?
Thinking out loud, the transition switching from short to long runners probably isn't very long at all but would make tuning a bit interesting with the sudden change in MAP pressure (assuming that's what the ECU is referencing and not a hot-wire setup, etc.). Basically just two settings with the additional butterflies like Pile was saying, on-off, etc. Maybe it's not too drastic a transition though thinking of all of those millions of cars with progressive throttle bodies (eg. VAG cars)??
Thoughts?
- ps2375
- Posts: 397
- Joined: Mon Aug 18, 2014 8:04 am
Re: DBW air cooled
VR's had a valve that did this and the 2.8 30V V6's had this also.
- Piledriver
- Moderator
- Posts: 22520
- Joined: Sat Feb 16, 2002 12:01 am
Re: DBW air cooled
Only in the amusement park of my mind.emerald wrote:Unlikely, hard to fabricate in back yard, but it may have variable plenum inlet slot areas, which should have a very similar effect.
i like the sound of that .If only you was in Florida i would let you do this in the shop i think this would be a good
thing .do you have plans for this ???
Hoping to fab it this fall now that I can work outside w/o bursting into flames.
Its a lot easier to pull off on a T3/t4 with stock cooling, as the fan housing isn't in the way.
(you want to pair 1/3 and 2/4, so a plenum (~3" tube) tube across the engine for each pair)
Plenty of room in the middle on a T4 with stock cooling.
Would ~work with a plenum on each side but not as efficiently due to the firing order.
Addendum to Newtons first law:
zero vehicles on jackstands, square gets a fresh 090 and 1911, cabby gets a blower.
EZ3.6 Vanagon after that.(mounted, needs everything finished) then Creamsicle.
zero vehicles on jackstands, square gets a fresh 090 and 1911, cabby gets a blower.
EZ3.6 Vanagon after that.(mounted, needs everything finished) then Creamsicle.
- Jadewombat
- Posts: 1447
- Joined: Sat Jun 22, 2002 12:01 am
Re: DBW air cooled
In my mind's eye, I'm thinking a setup with a dual TB end castings out near the heads, on top of that two downward runners and one large runner coming in from the side conjoined to a plenum which runs to a single TB above the middle of the case, on top of those out at the heads dual TBs set up for DBW.
I know it's a cluster trying to explain this, I'll see if I can p-chop something together visually. The single TB at the center would work most of the time, at full-throttle the duals would open.
Sorry for the topic hijack, Emerald.
I know it's a cluster trying to explain this, I'll see if I can p-chop something together visually. The single TB at the center would work most of the time, at full-throttle the duals would open.
Sorry for the topic hijack, Emerald.
-
- Posts: 22
- Joined: Sun Aug 28, 2016 2:05 pm
Re: DBW air cooled
I tried to stay away from the DBW thing for long time but now things are a lot better than they was back in the late 90s most good ECUs can do DBW now so what is the hang up ????