T3 side mount antenna?

Notches, fastbacks, squarebacks.

Moderator: Tom Notch

Post Reply
User avatar
Posts: 21918
Joined: Sat Feb 16, 2002 3:01 am
Location: Van Alstyne, Texas

T3 side mount antenna?

Post by Piledriver » Sat Apr 09, 2016 10:36 pm

My square has a 2-point side mount antenna on the passenger side, screws into the A-pillar.
The original is long past its use by date (plastic has deteriorated), but I have had zero luck finding a direct replacement.

The width of the base is ~17mm or less, and has a little arm that comes forward and in for the second support about 14" up.

Does anyone know if the ones they sell for early T1s are usable in that location? Too wide?

I guess I could just weld it up and stick one in the front fender.
I, for one, regularly embrace our new robot overlords, as I am the guy fixing the robots...

User avatar
Posts: 23738
Joined: Thu May 23, 2002 2:01 am

Re: T3 side mount antenna?

Post by Marc » Sat Apr 09, 2016 10:43 pm

As a rule, antennae were dealer-installed. Most came from a few popular suppliers, but nearly anything's possible. Post a photo, please.

Post Reply