I have a small problem that i need help with. I dropped my bug using cb drop spindels. after installing them i realized that there is no provision for the speedo cable, not that it would fit because of the arms arms are in the way. what did you guys do for a speedo after doing this. I have a cool 914 speedo I would like to keep. any ideas.
Randy
Speedo delema
-
Piledriver
- Moderator
- Posts: 22520
- Joined: Sat Feb 16, 2002 12:01 am
Re: Speedo delema
Strange, I installed CB drop spindles on my 68 and it still had a speedo cable...
Check the US driver side spindle?
If RHD you may need to make up a custom cable, if rhd setup uses the r side spindle..
Check the US driver side spindle?
If RHD you may need to make up a custom cable, if rhd setup uses the r side spindle..
Addendum to Newtons first law:
zero vehicles on jackstands, square gets a fresh 090 and 1911, cabby gets a blower.
EZ3.6 Vanagon after that.(mounted, needs everything finished) then Creamsicle.
zero vehicles on jackstands, square gets a fresh 090 and 1911, cabby gets a blower.
EZ3.6 Vanagon after that.(mounted, needs everything finished) then Creamsicle.
-
ouvw2
- Posts: 363
- Joined: Fri Jan 17, 2003 12:01 am
Re: Speedo delema
i ve decieded to just use the speedo down load on my cell until I can figure this out. thanks
-
Max Welton
- Posts: 3023
- Joined: Mon Jun 03, 2002 12:01 am
Re: Speedo delema
I have seen GPS speedometers for such things as marine applications.
Max
Max