Yes, I'm building..., **EDIT** Bought a 2165cc :) Official 10sec car!! Now project 9sec...

With Turbo and Super charging you can create massive horsepower with vw motors.

Moderator: seabeebuggy

mactaylor
Posts: 29
Joined: Tue Jan 18, 2011 3:50 pm
Location: Albury NSW Australia

Re: Yes, I'm building..., **EDIT** Bought a 2165cc :) Official 10sec car!! Now project 9sec...

Post by mactaylor » Sun Aug 05, 2018 6:56 pm

Hi bug66. What are the specs on your turbo if you don't mind me asking?

User avatar
petew
Posts: 3714
Joined: Sat Oct 07, 2006 6:05 pm
Location: Sydney/Australia
Contact:

Re: Yes, I'm building..., **EDIT** Bought a 2165cc :) Official 10sec car!! Now project 9sec...

Post by petew » Mon Aug 06, 2018 12:05 am

mactaylor wrote:
Sun Aug 05, 2018 6:56 pm
Hi bug66. What are the specs on your turbo if you don't mind me asking?
You should definitely put a turbo on the black car! :twisted:

bug66
Posts: 172
Joined: Tue Apr 01, 2014 3:26 am

Re: Yes, I'm building..., **EDIT** Bought a 2165cc :) Official 10sec car!! Now project 9sec...

Post by bug66 » Mon Aug 06, 2018 3:37 am

mactaylor wrote:
Sun Aug 05, 2018 6:56 pm
Hi bug66. What are the specs on your turbo if you don't mind me asking?
Too small :shock: :mrgreen:


It’s a T3/T4, stage 3, whatever that means.

I think the next will be a custom Precision 5862
---

2165cc T3/T4 turbo, DTA S60 on E85.

Boost was created only to make people smile, and make power! 8)

10.626 @ 132mph SCC2016
10.407 @ 134mph SCC2017
10.221 @ 135mph SCC2018

User avatar
Kalle
Posts: 299
Joined: Tue Nov 16, 2004 3:10 am

Re: Yes, I'm building..., **EDIT** Bought a 2165cc :) Official 10sec car!! Now project 9sec...

Post by Kalle » Mon Aug 06, 2018 8:52 am

They are already far above 400 whp at a lot lower boost than last year! And still fat and safe. Keep on with the good work M8!

-K-

User avatar
Chip Birks
Posts: 2981
Joined: Wed Mar 12, 2008 7:59 pm
Location: Pleasant Grove, Utah

Re: Yes, I'm building..., **EDIT** Bought a 2165cc :) Official 10sec car!! Now project 9sec...

Post by Chip Birks » Mon Aug 06, 2018 12:13 pm

Sweet! Goes to show that you don't have to have a crazy high tech turbo to get good numbers. Though it certainly does make it easier I suppose!

bug66
Posts: 172
Joined: Tue Apr 01, 2014 3:26 am

Re: Yes, I'm building..., **EDIT** Bought a 2165cc :) Official 10sec car!! Now project 9sec...

Post by bug66 » Mon Aug 06, 2018 1:09 pm

Old turbo design, small 2165cc engine.

But 501,5whp and 667nm/492 ft lbs to the tires!

Pig fat and lazy ignition, but it got there without a hiccup!
---

2165cc T3/T4 turbo, DTA S60 on E85.

Boost was created only to make people smile, and make power! 8)

10.626 @ 132mph SCC2016
10.407 @ 134mph SCC2017
10.221 @ 135mph SCC2018

mactaylor
Posts: 29
Joined: Tue Jan 18, 2011 3:50 pm
Location: Albury NSW Australia

Re: Yes, I'm building..., **EDIT** Bought a 2165cc :) Official 10sec car!! Now project 9sec...

Post by mactaylor » Mon Aug 06, 2018 3:18 pm

Pete I am onto it! Just gathering parts. Thanks bug66.

mactaylor
Posts: 29
Joined: Tue Jan 18, 2011 3:50 pm
Location: Albury NSW Australia

Re: Yes, I'm building..., **EDIT** Bought a 2165cc :) Official 10sec car!! Now project 9sec...

Post by mactaylor » Mon Aug 06, 2018 3:26 pm

Awesome numbers by the way!

User avatar
Chip Birks
Posts: 2981
Joined: Wed Mar 12, 2008 7:59 pm
Location: Pleasant Grove, Utah

Re: Yes, I'm building..., **EDIT** Bought a 2165cc :) Official 10sec car!! Now project 9sec...

Post by Chip Birks » Mon Aug 06, 2018 4:19 pm

bug66 wrote:
Mon Aug 06, 2018 1:09 pm
Old turbo design, small 2165cc engine.

But 501,5whp and 667nm/492 ft lbs to the tires!

Pig fat and lazy ignition, but it got there without a hiccup!
Well done! That should get you a 9! Good luck!

Amurray
Posts: 18
Joined: Tue Mar 06, 2018 3:51 pm
Location: Tampa, FL

Re: Yes, I'm building..., **EDIT** Bought a 2165cc :) Official 10sec car!! Now project 9sec...

Post by Amurray » Thu Aug 09, 2018 12:09 pm

bug66 wrote:
Mon Aug 06, 2018 1:09 pm
Old turbo design, small 2165cc engine.

But 501,5whp and 667nm/492 ft lbs to the tires!

Pig fat and lazy ignition, but it got there without a hiccup!
WOW! :shock: at what boost was that? This give me something to look forward to when I get back to the dyno with the new clutch in. I have no clue what my #s would be. I do not have the water to air intercooler but I do have an air to air on a 2234cc engine. I just hope it works out this time.

Congrats on your #s very impressive :wink:
Last edited by Amurray on Tue Aug 21, 2018 5:17 pm, edited 1 time in total.

bug66
Posts: 172
Joined: Tue Apr 01, 2014 3:26 am

Re: Yes, I'm building..., **EDIT** Bought a 2165cc :) Official 10sec car!! Now project 9sec...

Post by bug66 » Fri Aug 10, 2018 1:47 am

Boost at peak hp and torque was 2,1 bars and dropped to 1,9 at 7000. Either due to a leak or that the turbo can't deliver the pressure. Will go over and check for leaks etc. :)
---

2165cc T3/T4 turbo, DTA S60 on E85.

Boost was created only to make people smile, and make power! 8)

10.626 @ 132mph SCC2016
10.407 @ 134mph SCC2017
10.221 @ 135mph SCC2018

User avatar
Kalle
Posts: 299
Joined: Tue Nov 16, 2004 3:10 am

Re: Yes, I'm building..., **EDIT** Bought a 2165cc :) Official 10sec car!! Now project 9sec...

Post by Kalle » Mon Aug 20, 2018 5:31 am

Come on mister.... show us your timeslip(s) from SCC!

-K-

User avatar
Wally
Posts: 4027
Joined: Mon Oct 28, 2002 3:01 am
Location: Netherlands, Europe

Re: Yes, I'm building..., **EDIT** Bought a 2165cc :) Official 10sec car!! Now project 9sec...

Post by Wally » Mon Aug 20, 2018 7:50 am

bug66 wrote:
Sun Aug 05, 2018 5:11 am
Nah, engine and trans will go into the new car I’m starting on this fall.

Narrowed and raised rear etc. Should get some meat under the rear fenders also :)
New car? Do tell more about that! Bug also or different platform?

PS congrats on the dyno numbers, awesome results! and I did not expect such huge gains tbh.
And congrats on your new PB, 10.2 if I got it right from FB right?
T4T: Type 4 Turbo engine, under construction

bug66
Posts: 172
Joined: Tue Apr 01, 2014 3:26 am

Re: Yes, I'm building..., **EDIT** Bought a 2165cc :) Official 10sec car!! Now project 9sec...

Post by bug66 » Wed Aug 22, 2018 5:13 am

10,221 felt good!

The 60-foot is the best I've done at 1,404. There are more to do on both launch and big end. But I see I need a speed sensor to build more boost in 3rd and 4th than in the two first gears. Kind of slippery from time to time.. :D

https://www.facebook.com/81361943872825 ... v6M53S_OjQ
You do not have the required permissions to view the files attached to this post.
---

2165cc T3/T4 turbo, DTA S60 on E85.

Boost was created only to make people smile, and make power! 8)

10.626 @ 132mph SCC2016
10.407 @ 134mph SCC2017
10.221 @ 135mph SCC2018

bug66
Posts: 172
Joined: Tue Apr 01, 2014 3:26 am

Re: Yes, I'm building..., **EDIT** Bought a 2165cc :) Official 10sec car!! Now project 9sec...

Post by bug66 » Wed Aug 22, 2018 5:21 am

Wally wrote:
Mon Aug 20, 2018 7:50 am
bug66 wrote:
Sun Aug 05, 2018 5:11 am
Nah, engine and trans will go into the new car I’m starting on this fall.

Narrowed and raised rear etc. Should get some meat under the rear fenders also :)
New car? Do tell more about that! Bug also or different platform?

PS congrats on the dyno numbers, awesome results! and I did not expect such huge gains tbh.
And congrats on your new PB, 10.2 if I got it right from FB right?
A '59. Narrowed and lowered (raised transmission)

:)


More to come when I pick it up.
---

2165cc T3/T4 turbo, DTA S60 on E85.

Boost was created only to make people smile, and make power! 8)

10.626 @ 132mph SCC2016
10.407 @ 134mph SCC2017
10.221 @ 135mph SCC2018

Post Reply