Video store

MarioVelotta · **Posted:** Wed Jul 21, 2010 1:36 am

Working on the others but here is my 11.57 pass. I need to get a good video camera. My buddy took this for me

2 years ago

panel · **Posted:** Wed Jul 21, 2010 2:23 pm

Very cool

HID GUY · **Joined:** Sun Sep 28, 2008 8:31 am **Posts:** 132

From last weekend

MarioVelotta · **Posted:** Wed Jul 21, 2010 11:34 pm

And my 11.53 pass

so67vw · **Joined:** Sun Jan 11, 2004 5:24 pm **Posts:** 102

HID GUY wrote:

From last weekend

I sure miss watching those boys put the power down to the track... Even on a bad day it's fun to watch and VERY motivating....

so67vw · **Joined:** Sun Jan 11, 2004 5:24 pm **Posts:** 102

Free rev video in car....

I'm still taking fuel out 'cause it's running rich....

I have no headliner or insulation in the car so it is louder than it will be (gonna try to make it VERY QUIET).... That will happen when I don't need to hear every little crack the motor makes.... Also my Alternator needs to be replaced 'cause it makes a little noise...

It idles nice but I think it's burn'n extra fuel after some RPM is involved... I guess I just need to keep on tweek'n...

my_medusa · **Joined:** Tue Jun 09, 2009 2:29 pm **Posts:** 43

nice rev

it's not turbo, but forced. my ongoing projekt 1192cc 36hp engine now with bypass but still with my lowest boost pulley.
just handyvideo
http://www.youtube.com/watch?v=YBwkugoBPq4

MarioVelotta · **Posted:** Sun Aug 08, 2010 5:40 pm

First pull clutch slipping

Second pull on reduced dyno load so it wouldn't slip

I did't get the 3rd pull on video because I was watching the computer screen :roll:

Forgot to record at the same time....

This type of dyno is cool and odd at the same time. He basicly started in 3rd gear from idle and then the Dyno holds at the top rpm, I told him 6500. It kinda lugs a little down low then pulls and holds... You can hear it all pretty well in the video too. Good thing I was messing with low rpm high gear tuning recently... Other wise it might not have worked :lol: