100 Cubic Inches of Fury!

With Turbo and Super charging you can create massive horsepower with vw motors.

Moderator: seabeebuggy

Post Reply
User avatar
Chip Birks
Posts: 2981
Joined: Wed Mar 12, 2008 7:59 pm
Location: Pleasant Grove, Utah

Re: 100 Cubic Inches of Fury!

Post by Chip Birks » Sun Jun 10, 2018 1:43 am

Chip Birks wrote:
Sat Jun 09, 2018 5:38 pm
Well, it appears that this under sell/over deliver thing is an industry wide thing. The new CBs measure out at 1.50, giving me .606" at the valve! Gonna have to knock the top off of the guides for clearance, and get rid of my newly installed titanium retainers in order to get the needed spring installed height. Gotta love it.
The more I've thought about it, and consulted with others on the subject, the more I feel like trying yet another direction with this valvetrain. I've contacted my vendor to see if they'd be willing to trade me for a set of 1.3s. Assuming they measure out correctly, it would put me at about .516". I think I'm okay with that. It would allow me to use my ti retainers, and would put way less stress on the valvetrain in general. And like Kalle said, I'll just turn up the boost if i need to.

User avatar
buguy
Posts: 1605
Joined: Wed Jan 26, 2005 11:53 pm
Location: Port Orange, FL

Re: 100 Cubic Inches of Fury!

Post by buguy » Sun Jun 10, 2018 5:42 am

I wondered about that. I saw on their site they had some 1.3's, and if history repeats it should put you almost where you wanted to be in the first place.

User avatar
Chip Birks
Posts: 2981
Joined: Wed Mar 12, 2008 7:59 pm
Location: Pleasant Grove, Utah

Re: 100 Cubic Inches of Fury!

Post by Chip Birks » Sat Jun 16, 2018 12:48 pm

Picked up some SCAT 1.25s, haven't had time to measure them though. The mouse got back burnered for a week or two. Time got away from me, I realized Thursday that I have a big 2 day race weekend next week. I just don't see having the time to get all of the new bits sorted by that point. So out came the big engine. I pulled it apart last night to re-ring, change cylinders and re-seal it. It'll hopefully be headed back into the car in the next couple of days. The compound stuff is getting shelved for a little bit too. I just want to race on something pretty proven and right now the big single works well for what I want. Hopefully back to the mouse in a week or two.

User avatar
buguy
Posts: 1605
Joined: Wed Jan 26, 2005 11:53 pm
Location: Port Orange, FL

Re: 100 Cubic Inches of Fury!

Post by buguy » Sat Jun 16, 2018 3:10 pm

That's weird that they aren't what they advertise.

User avatar
MarioVelotta
Posts: 3814
Joined: Wed Mar 12, 2003 3:01 am
Location: Monroe, Wa.
Contact:

Re: 100 Cubic Inches of Fury!

Post by MarioVelotta » Thu Jul 19, 2018 4:44 pm

You measure up those scat rockers yet?
The Dub Shop
Mario@thedubshop.net
2276 Turbo - 92 Octane
11.537 @ 115.74mph - 15psi
1600 S.C. - 92 Octane
15.47 @ 83mph - 13psi
1600 NA ITB - 18sec :lol:
Facebook-Tech-Store

User avatar
Chip Birks
Posts: 2981
Joined: Wed Mar 12, 2008 7:59 pm
Location: Pleasant Grove, Utah

Re: 100 Cubic Inches of Fury!

Post by Chip Birks » Thu Jul 19, 2018 8:37 pm

Nah, family is out for the next 4 days though. Probably should spend some time in the oven, I mean garage, while they are gone...

User avatar
buguy
Posts: 1605
Joined: Wed Jan 26, 2005 11:53 pm
Location: Port Orange, FL

Re: 100 Cubic Inches of Fury!

Post by buguy » Thu Jul 19, 2018 8:58 pm

I feel ya! 95 in the shop everyday. Gettin real tired of sweating 12 hours a day!

Post Reply