1600 EFI Turbo Build
- petew
- Posts: 3920
- Joined: Sat Oct 07, 2006 4:05 pm
Re: 1600 turbo EFI build
Are you planning some sort of intercooler too?
-
- Posts: 4719
- Joined: Thu Feb 15, 2007 9:28 pm
Re: 1600 turbo EFI build
I for one will be interested to see what your IAT's will be at 10 lbs. without cooling.
I'm guessing you will be at about 90 hp at 7 lbs and 105 hp at 10 lbs. if you don't get any detonation.....
I'm guessing you will be at about 90 hp at 7 lbs and 105 hp at 10 lbs. if you don't get any detonation.....
Stripped66 wrote:The point wasn't to argue air temps with the current world record holder, but to dispel the claim that the K03 is wrapped up at 150 HP. It's not.
- MarioVelotta
- Posts: 4083
- Joined: Wed Mar 12, 2003 12:01 am
Re: 1600 turbo EFI build
No intercooler as of yet. I wanted to see if this was a feasible as in for a low boost kit option. And an intercooler would just pop most budgets.
If everything goes well, I may put my intercooler back in or just use my meth injection. All in due time.
If everything goes well, I may put my intercooler back in or just use my meth injection. All in due time.
The Dub Shop
[email protected]
1600 ITB NA - 18sec
1600 Supercharged - 13psi - 15.40 @ 84.66mph
1600 Turbo - 185hp 250tq!! Going for 200
2276 Turbo - 15psi - 11.537 @ 115.74mph
Facebook-Tech-Store
[email protected]
1600 ITB NA - 18sec
1600 Supercharged - 13psi - 15.40 @ 84.66mph
1600 Turbo - 185hp 250tq!! Going for 200
2276 Turbo - 15psi - 11.537 @ 115.74mph
Facebook-Tech-Store
- MarioVelotta
- Posts: 4083
- Joined: Wed Mar 12, 2003 12:01 am
Re: 1600 turbo EFI build
Here is a quickie
The Dub Shop
[email protected]
1600 ITB NA - 18sec
1600 Supercharged - 13psi - 15.40 @ 84.66mph
1600 Turbo - 185hp 250tq!! Going for 200
2276 Turbo - 15psi - 11.537 @ 115.74mph
Facebook-Tech-Store
[email protected]
1600 ITB NA - 18sec
1600 Supercharged - 13psi - 15.40 @ 84.66mph
1600 Turbo - 185hp 250tq!! Going for 200
2276 Turbo - 15psi - 11.537 @ 115.74mph
Facebook-Tech-Store
-
- Posts: 4719
- Joined: Thu Feb 15, 2007 9:28 pm
Re: 1600 turbo EFI build
Sweet Mario!!!!
Sounds really nice!!!1
Sounds really nice!!!1
Stripped66 wrote:The point wasn't to argue air temps with the current world record holder, but to dispel the claim that the K03 is wrapped up at 150 HP. It's not.
- MarioVelotta
- Posts: 4083
- Joined: Wed Mar 12, 2003 12:01 am
Re: 1600 turbo EFI build
Can't wait to drive it! No body will believe it's a 1600
The Dub Shop
[email protected]
1600 ITB NA - 18sec
1600 Supercharged - 13psi - 15.40 @ 84.66mph
1600 Turbo - 185hp 250tq!! Going for 200
2276 Turbo - 15psi - 11.537 @ 115.74mph
Facebook-Tech-Store
[email protected]
1600 ITB NA - 18sec
1600 Supercharged - 13psi - 15.40 @ 84.66mph
1600 Turbo - 185hp 250tq!! Going for 200
2276 Turbo - 15psi - 11.537 @ 115.74mph
Facebook-Tech-Store
-
- Posts: 4719
- Joined: Thu Feb 15, 2007 9:28 pm
Re: 1600 turbo EFI build
I'm sure you can find a spot to install your WI so you can turn up the boost.
You know you'll never be happy with 7 lbs. or for that matter 10 lbs.......
You know you'll never be happy with 7 lbs. or for that matter 10 lbs.......
Stripped66 wrote:The point wasn't to argue air temps with the current world record holder, but to dispel the claim that the K03 is wrapped up at 150 HP. It's not.
- MarioVelotta
- Posts: 4083
- Joined: Wed Mar 12, 2003 12:01 am
Re: 1600 turbo EFI build
I honestly had no problem with the power I already had. Almost more than my bid motor. I just didn't have to worry about anything. If 7psi gets it up and going a little quicker, I'll be good! I have lots more to try on this little thing. Bigger boost will be saved for the ITB's with turbo and intercooler. That will be closer to the time when my big motor ready. Just incase I go overboard
The Dub Shop
[email protected]
1600 ITB NA - 18sec
1600 Supercharged - 13psi - 15.40 @ 84.66mph
1600 Turbo - 185hp 250tq!! Going for 200
2276 Turbo - 15psi - 11.537 @ 115.74mph
Facebook-Tech-Store
[email protected]
1600 ITB NA - 18sec
1600 Supercharged - 13psi - 15.40 @ 84.66mph
1600 Turbo - 185hp 250tq!! Going for 200
2276 Turbo - 15psi - 11.537 @ 115.74mph
Facebook-Tech-Store
-
- Posts: 7404
- Joined: Sat Mar 10, 2001 12:01 am
Re: 1600 turbo EFI build
How much boost do you think the stock clampless end casting hoses will take?
Steve
My Baja Build
My Baja Build
- MarioVelotta
- Posts: 4083
- Joined: Wed Mar 12, 2003 12:01 am
Re: 1600 turbo EFI build
I ran those to 12psi without leaks on my 2276. At 10 should be fine.
The Dub Shop
[email protected]
1600 ITB NA - 18sec
1600 Supercharged - 13psi - 15.40 @ 84.66mph
1600 Turbo - 185hp 250tq!! Going for 200
2276 Turbo - 15psi - 11.537 @ 115.74mph
Facebook-Tech-Store
[email protected]
1600 ITB NA - 18sec
1600 Supercharged - 13psi - 15.40 @ 84.66mph
1600 Turbo - 185hp 250tq!! Going for 200
2276 Turbo - 15psi - 11.537 @ 115.74mph
Facebook-Tech-Store
- turbobaja
- Posts: 2826
- Joined: Fri Sep 14, 2007 4:56 pm
Re: 1600 turbo EFI build
Glad you got it up and running again, sounds tough.
Have you got any limitations in mind with respect to the completely bone stock rotating assembly and valve train (rev limit/goal)? Or are you gonna push it and find the weak link(s) ?
Have you got any limitations in mind with respect to the completely bone stock rotating assembly and valve train (rev limit/goal)? Or are you gonna push it and find the weak link(s) ?
Karl
DON'T QUIT
DON'T QUIT
- MarioVelotta
- Posts: 4083
- Joined: Wed Mar 12, 2003 12:01 am
Re: 1600 turbo EFI build
Yup, I'll limit it to 4500 maybe 4700 depending on the new curve. Boost will stay conservative as well. I'm not interested in detonating this thing until my big motor is ready to go. But even then I still want to try the 38 ITB's on here, then turbo that setup as well!
Big plans!!!
Big plans!!!
The Dub Shop
[email protected]
1600 ITB NA - 18sec
1600 Supercharged - 13psi - 15.40 @ 84.66mph
1600 Turbo - 185hp 250tq!! Going for 200
2276 Turbo - 15psi - 11.537 @ 115.74mph
Facebook-Tech-Store
[email protected]
1600 ITB NA - 18sec
1600 Supercharged - 13psi - 15.40 @ 84.66mph
1600 Turbo - 185hp 250tq!! Going for 200
2276 Turbo - 15psi - 11.537 @ 115.74mph
Facebook-Tech-Store
- MarioVelotta
- Posts: 4083
- Joined: Wed Mar 12, 2003 12:01 am
Re: 1600 turbo EFI build
Well today I dynoed. Not what I was hoping for but a good starting point I guess. Only made 90hp and boost comes on real late. It's not push you into the seat power.
What I noticed out on the street is that my CHT temps are down about 100 degrees and EGT's are down about 200. Same location for both sensors. That is going from a 1.375" header and muffler with J-tubes to my 1.5" turbo header. Obviously it worked much better with my 2L
Boost comes on around 3000 and builds to 9psi by 4500. Other than that is drives just like normal unless I really try to get moving from a stop. We will see what comes of it from here
What I noticed out on the street is that my CHT temps are down about 100 degrees and EGT's are down about 200. Same location for both sensors. That is going from a 1.375" header and muffler with J-tubes to my 1.5" turbo header. Obviously it worked much better with my 2L
Boost comes on around 3000 and builds to 9psi by 4500. Other than that is drives just like normal unless I really try to get moving from a stop. We will see what comes of it from here
Last edited by MarioVelotta on Fri Nov 08, 2013 8:35 pm, edited 2 times in total.
The Dub Shop
[email protected]
1600 ITB NA - 18sec
1600 Supercharged - 13psi - 15.40 @ 84.66mph
1600 Turbo - 185hp 250tq!! Going for 200
2276 Turbo - 15psi - 11.537 @ 115.74mph
Facebook-Tech-Store
[email protected]
1600 ITB NA - 18sec
1600 Supercharged - 13psi - 15.40 @ 84.66mph
1600 Turbo - 185hp 250tq!! Going for 200
2276 Turbo - 15psi - 11.537 @ 115.74mph
Facebook-Tech-Store
-
- Posts: 4719
- Joined: Thu Feb 15, 2007 9:28 pm
Re: 1600 turbo EFI build
You need to turn that engine up to 5000 or 5200 rpm...
Stripped66 wrote:The point wasn't to argue air temps with the current world record holder, but to dispel the claim that the K03 is wrapped up at 150 HP. It's not.
- MarioVelotta
- Posts: 4083
- Joined: Wed Mar 12, 2003 12:01 am
Re: 1600 turbo EFI build
No sense in turning it more. The power falls off after 4500.
The Dub Shop
[email protected]
1600 ITB NA - 18sec
1600 Supercharged - 13psi - 15.40 @ 84.66mph
1600 Turbo - 185hp 250tq!! Going for 200
2276 Turbo - 15psi - 11.537 @ 115.74mph
Facebook-Tech-Store
[email protected]
1600 ITB NA - 18sec
1600 Supercharged - 13psi - 15.40 @ 84.66mph
1600 Turbo - 185hp 250tq!! Going for 200
2276 Turbo - 15psi - 11.537 @ 115.74mph
Facebook-Tech-Store