K03 turbo

With Turbo and Super charging you can create massive horsepower with vw motors.
Booky1
Posts: 28
Joined: Thu Jul 06, 2017 2:54 pm

K03 turbo

Post by Booky1 »

Would a k03 turbo off an 2000 vw not sure model of car?Would work on a stock 1600.What kind of boost could I get could it produce 15lbs at 3500 to 4000 rpms?It will be in a single seat rail.mail
Booky1
Posts: 28
Joined: Thu Jul 06, 2017 2:54 pm

Re: K03 turbo

Post by Booky1 »

I read my post I left at least one thing out it is off a 1.8m motor.
Clonebug
Posts: 4719
Joined: Thu Feb 15, 2007 9:28 pm

Re: K03 turbo

Post by Clonebug »

Measure the inlet on the turbo compressor and the outlet on the turbine and if they are less than 1.75 inches you should have pretty good results.

The K03 I have had in my hands was a pretty small turbo. I would think it would be great for a rail where you want insta-boost at mid throttle.

You might not get 25 lbs out of it but it should be good for a start.
Stripped66 wrote:The point wasn't to argue air temps with the current world record holder, but to dispel the claim that the K03 is wrapped up at 150 HP. It's not.
Booky1
Posts: 28
Joined: Thu Jul 06, 2017 2:54 pm

Re: K03 turbo

Post by Booky1 »

Thanks Clonebug for your reply I was hoping you would answer me you seem to be very good at this subject. I don't have the turbo in front of me but I will keep that in mind when I look at it.
Clonebug
Posts: 4719
Joined: Thu Feb 15, 2007 9:28 pm

Re: K03 turbo

Post by Clonebug »

Every turbo and build is different so what works for one might not work for another.
A K03 is a small turbo and should be a quick spool for a 1600. There are many factors but I don't see why it wouldn't work.......You are going blow through aren't you????
If drawthrough I have no idea how it would work.
Stripped66 wrote:The point wasn't to argue air temps with the current world record holder, but to dispel the claim that the K03 is wrapped up at 150 HP. It's not.
Booky1
Posts: 28
Joined: Thu Jul 06, 2017 2:54 pm

Re: K03 turbo

Post by Booky1 »

I am looking at draw through it looks to be the essayist to do blow through seem more complicated. But I am new to this game of turbo charging.
hwhite57
Posts: 2
Joined: Fri Jun 09, 2017 4:55 pm

Re: K03 turbo

Post by hwhite57 »

Hi booky would you keep a update going with the turbo install. I have a 1776 with dual 44s on it and I want to do a blow through but I'm also extremely new to the turbo thing. I want to install it on my 57 manx

Sent from my SAMSUNG-SM-G935A using Tapatalk

Booky1
Posts: 28
Joined: Thu Jul 06, 2017 2:54 pm

Re: K03 turbo

Post by Booky1 »

I am confused I just got the turbo in my hands and it looks like it is water cooled am I wrong or can I still use it? I hope I didn't buy something I can't use.
Clonebug
Posts: 4719
Joined: Thu Feb 15, 2007 9:28 pm

Re: K03 turbo

Post by Clonebug »

Most OEM turbos are water cooled.

Just ignore those connections and run without them....make sure you give it oil in the correct holes and direction........

You can remove the pipes that go to the water connections also.
Stripped66 wrote:The point wasn't to argue air temps with the current world record holder, but to dispel the claim that the K03 is wrapped up at 150 HP. It's not.
Booky1
Posts: 28
Joined: Thu Jul 06, 2017 2:54 pm

Re: K03 turbo

Post by Booky1 »

Thank you for replying that helps l thought l put more money in the piggy of learning a lesson.
Post Reply