My draw through turbo
- buguy
- Posts: 6209
- Joined: Wed Jan 26, 2005 8:53 pm
Re: My draw through turbo
Your driving your bug on a sketchy tune 330 miles?!?! You have balls!
-
- Posts: 952
- Joined: Mon Jun 10, 2013 4:54 am
- rubenski
- Posts: 2033
- Joined: Mon Jun 30, 2014 3:28 am
Re: My draw through turbo
Maybe. Hard to say with belgium weather and a buggy
Where are you from?
Where are you from?
Better to be blown than to suck!
-
- Posts: 952
- Joined: Mon Jun 10, 2013 4:54 am
Re: My draw through turbo
End of the day what could go wrong
Believe me the bug will have been on a rolling road before then. It done in its current tune 75 miles this morning and it was fine we’ll all most, you could sit at 60mph for a little while but every now and then she needed a quick blast to clean her out cause it started to get lumpy but a quick blast and she was good again for a while so I’m guessing she is still running rich on the cruise with the 152 mains for some reason and that’s why I’ve stepped down to the only other mains I have on me witch are the 140’s I’ve just fitted. So will see how she drives tonight
-
- Posts: 952
- Joined: Mon Jun 10, 2013 4:54 am
- petew
- Posts: 3920
- Joined: Sat Oct 07, 2006 4:05 pm
Re: My draw through turbo
PICS! Or it didn't happen.
-
- Posts: 952
- Joined: Mon Jun 10, 2013 4:54 am
- rubenski
- Posts: 2033
- Joined: Mon Jun 30, 2014 3:28 am
-
- Posts: 952
- Joined: Mon Jun 10, 2013 4:54 am
Re: My draw through turbo
Ok. Well put it this way I all ready have the ferry tickets and new passport sorted just waiting for the tickets to go on sales. I will definitely post a photo or two on this thread either showing you that I’ve got balls and have taking my bug to that show or of photos showing you my bug on a tow truck
- buguy
- Posts: 6209
- Joined: Wed Jan 26, 2005 8:53 pm
Re: My draw through turbo
Well you have time to dial it in it sounds like!
-
- Posts: 952
- Joined: Mon Jun 10, 2013 4:54 am
Re: My draw through turbo
Yep plenty of time
- buguy
- Posts: 6209
- Joined: Wed Jan 26, 2005 8:53 pm
Re: My draw through turbo
Is there a way you can boost reference your enrichment circuit on those?
-
- Posts: 952
- Joined: Mon Jun 10, 2013 4:54 am
Re: My draw through turbo
I’m not sure if that can be done on a Weber DCOE carb?
- Chip Birks
- Posts: 4003
- Joined: Wed Mar 12, 2008 5:59 pm
Re: My draw through turbo
Are you boost referencing the fuel pressure regulator? That's the typical sidedraft hack that most folks do.