Weber 40 dcoe idle setting
-
advinnie
- Posts: 952
- Joined: Mon Jun 10, 2013 4:54 am
Weber 40 dcoe idle setting
Hi all just a quick one, I’m using a Weber 40 dcoe in a draw through turbo set up on my bug, now to get it to idle at 900-1100rpm I have to wind in the idle speed screw a long way and the butterflies are uncovering the progression ports. Now to bring the butterflies back into the correct position could I just increase the idle timing a little more?
-
Clonebug
- Posts: 4719
- Joined: Thu Feb 15, 2007 9:28 pm
Re: Weber 40 dcoe idle setting
Yes you can but you will have to somehow limit your max timing since you don't have any control on the distributor........unless you have a black box or something....
Stripped66 wrote:The point wasn't to argue air temps with the current world record holder, but to dispel the claim that the K03 is wrapped up at 150 HP. It's not.
-
advinnie
- Posts: 952
- Joined: Mon Jun 10, 2013 4:54 am
Re: Weber 40 dcoe idle setting
I have full control of my timing so that is not a problem.
-
buguy
- Posts: 6209
- Joined: Wed Jan 26, 2005 8:53 pm
Re: Weber 40 dcoe idle setting
You could always drill holes in the butterflys
-
rs58rag
- Posts: 58
- Joined: Fri May 10, 2013 7:36 pm