12mm Thread Resistor Plugs for turbo Megajolt

[Krochus]

Let’s have a discussion about spark plugs for my turbo 2165 using EMPI heads that use 12mmx19mm spark plugs (currency Bosch 7700) that will need to be resistor plugs to work in conjunction with a Megajolt EDIS system

I’m thinking NGK 4339 but one thing I’m concerned about is the heat range. I cannot find any information on the Bosch plugs I have that due to their color is too hot I suspect. The NGK is DCPR8E which is a heat range 8

Dual Weber 40mm blow through turbo pushing 4-6 psi

[madmike]

you should be fine with 8's higher numbers colder the plug with NGK's

[bug66]

NGK DPR8EA?