KART

Can't afford the rare and extreme car of your dreams? Well just build one.
User avatar
Sepi
Posts: 36
Joined: Fri Sep 15, 2017 2:31 pm
Location: Finland

Re: KART

Post by Sepi » Sat May 19, 2018 9:00 am

petew wrote:
Sat May 19, 2018 12:26 am
= Go kart!

That's great. Is it difficult to get to road approved?
It was quite a challenge to get it street legal. This follows all given rules, but only those rear tyres are some inches too wide, I still demand that it will be accepted. Mudguards must be there and even I have fitted E approved 4 point seat belts, I have to add original type 3 point belts, because traffic law says, if there is an open body vehicle, it must be fitted with 3 point belts on the outer seats. Stupid...

User avatar
Sepi
Posts: 36
Joined: Fri Sep 15, 2017 2:31 pm
Location: Finland

Re: KART

Post by Sepi » Sun May 27, 2018 2:27 pm

While my custom speedo is on the way from Germany, I did some drilling for switches. And I used all day in my garage, but just few kables found their location inside of that tube body. It takes tiiiimeee...

Image

H2OSB
Posts: 505
Joined: Mon Aug 21, 2000 2:01 am

Re: KART

Post by H2OSB » Sun May 27, 2018 7:14 pm

I do love that dash. Very purposeful looking.

H2OSB

User avatar
Sepi
Posts: 36
Joined: Fri Sep 15, 2017 2:31 pm
Location: Finland

Re: KART

Post by Sepi » Thu May 31, 2018 11:29 am

Rear electrics ready, front side half way.

Image

Speedo ready for the future, with this engine - a bit ridiculous...

Image

KAR-7 - license plate is also ready, but the vehicle still needs some attention

Ol'fogasaurus
Posts: 13724
Joined: Tue Nov 14, 2006 1:17 am
Location: Just north of Seattle

Re: KART

Post by Ol'fogasaurus » Thu May 31, 2018 12:15 pm

The work, the speed of your design and the build work is very impressive! :shock: (wow!) You've done a great job! 8) (jealous)

Hoping to see some video of it in motion but not back all bent up ( :cry: )

Lee

User avatar
Sepi
Posts: 36
Joined: Fri Sep 15, 2017 2:31 pm
Location: Finland

Re: KART

Post by Sepi » Sat Jun 16, 2018 11:05 am

Today had the feeling of a winner; all switches and some other connects work as planned :-)
video

H2OSB
Posts: 505
Joined: Mon Aug 21, 2000 2:01 am

Re: KART

Post by H2OSB » Sat Jun 16, 2018 11:12 am

Damn, that thing is seriously bad ass!

H2OSB

Post Reply