Todd Francis (TF-1) case

Who is the best person to rebuild your engine? You...

Moderator: sparkmaster1

Post Reply
MConstantbabble
Posts: 13
Joined: Mon Sep 08, 2014 4:09 pm

Todd Francis (TF-1) case

Post by MConstantbabble » Wed Jun 15, 2016 4:41 pm

Just curious if anyone here has experience with this case for street use?
Thanks!

User avatar
woodsbuggy1
Posts: 493
Joined: Sun Feb 20, 2011 8:15 pm
Location: NE Indiana

Re: Todd Francis (TF-1) case

Post by woodsbuggy1 » Tue Jun 28, 2016 9:52 pm

I have no experience with this case but have heard good things about it. One thing that I am curious about it is, what other special parts are required? I know that cam and crank gears need to be changed but what else? What is the total cost when all of the special parts are included?
Kenric
Good quality is getting harder and harder to find.

Tinyvw
Posts: 18
Joined: Fri Feb 16, 2018 9:43 am

Re: Todd Francis (TF-1) case

Post by Tinyvw » Sun Feb 18, 2018 2:34 pm

I am building one over the next year, it's a slow build. ..the dropped cam gear set is the only special part needed, other than that stock parts will bolt right on. ..the gear set is about 175 bucks. ..the case is superior in every way to anything else on the market. ..you can even get the 104mm bore if you want, if you can find affordable heads.

User avatar
woodsbuggy1
Posts: 493
Joined: Sun Feb 20, 2011 8:15 pm
Location: NE Indiana

Re: Todd Francis (TF-1) case

Post by woodsbuggy1 » Sun Feb 18, 2018 6:12 pm

I look forward to seeing your build thread, have heard nothing but good things about the TF-1 case.
Kenric
Good quality is getting harder and harder to find.

ridenrace6
Posts: 8
Joined: Wed Aug 26, 2009 10:00 pm
Location: moulton, al.

Re: Todd Francis (TF-1) case

Post by ridenrace6 » Mon Oct 08, 2018 9:44 am

who makes the cam and crank gear sets for these?


Sent from my iPhone using Tapatalk

User avatar
turbobaja
Posts: 2806
Joined: Fri Sep 14, 2007 6:56 pm
Location: The Evergreen State

Re: Todd Francis (TF-1) case

Post by turbobaja » Tue Oct 09, 2018 6:42 pm

I'm pretty sure there is an option for standard cam location as well if you don't need the added clearance. Then it's just like building a stock case, but way better.
Karl

DON'T QUIT

Post Reply