I have a set of 98mm wbx pistons and liners,that i want to put in my new wbxer.
The question is,are there any gasket on the top as in the stock setup?
In my set was nothing in?
Thanks Turner,
now looking to his new 2,3 wbx next year
and cant wait to climb the dolomites next summer
To the 98mm wbx engine builder
-
- Posts: 621
- Joined: Wed Mar 25, 2009 12:50 pm
Re: To the 98mm wbx engine builder
Yes, stock 'o' rings are o.k for the liners, but compression gaskets for the heads, originals reinz ot Mahle are not available, i had spares made, i would mock up and check for deck height and required gasket thickness.
-
- Posts: 10
- Joined: Tue Nov 24, 2009 11:36 am
Re: To the 98mm wbx engine builder
witch kind of material are they?
My best friend and enginebuilder Jürgen works at SEMCON Neckarsulm and had good connections.
Thanks
My best friend and enginebuilder Jürgen works at SEMCON Neckarsulm and had good connections.
Thanks
-
- Posts: 621
- Joined: Wed Mar 25, 2009 12:50 pm
Re: To the 98mm wbx engine builder
Hi, Aluminium, we have many bespoke gasket co's in the UK. you can get any spec gasket you want.turner wrote:witch kind of material are they?
My best friend and enginebuilder Jürgen works at SEMCON Neckarsulm and had good connections.
Thanks
-
- Posts: 389
- Joined: Sat Jan 04, 2003 12:01 am
Re: To the 98mm wbx engine builder
I like to use a copper head gaskets. If the stock OD of the 98 is the same as the stock 94 cylinder gasket 106.20 I have some .042 1.05mm copper gaskets made for 96mm cylinders, I made a fixture in a lathe to hold them in a aluminum bore clamped them with a smaller holding ring and machined the inside dia. to fit the 98mm bore on the mill. Rocky
-
- Posts: 621
- Joined: Wed Mar 25, 2009 12:50 pm
Re: To the 98mm wbx engine builder
^^^^this too, copper is a great gasket material.
-
- Posts: 7404
- Joined: Sat Mar 10, 2001 12:01 am
Re: To the 98mm wbx engine builder
Go Westy also sells the copper gaskets ready to go. I'm not certain they do 98mm bore though (I haven't been keeping up with their stuff since I now have a better built Rocky Jennings engine in my van).
Steve
My Baja Build
My Baja Build