head stud pcd

Here's the place for info on converting to a Type V motor!
Post Reply
bugtub
Posts: 16
Joined: Thu Mar 20, 2014 2:00 pm
Location: England
Contact:

head stud pcd

Post by bugtub » Sun Jan 15, 2017 12:05 pm

Apologies if this has been discussed before I have had a searched and cannot find an answer. The Wasserboxer has a head stud spacing of 100mm which is 141.42mm pcd what is the spacing of a type 1 engine

bugtub
Posts: 16
Joined: Thu Mar 20, 2014 2:00 pm
Location: England
Contact:

Re: head stud pcd

Post by bugtub » Mon Jan 16, 2017 2:52 pm

Had a look at some type 1 heads today, I was thinking they would be equally spaced on a pcd but there not. So I’m guessing that thinking a Wasserboxer is 100mm spacing is also wrong :roll:

User avatar
Marc
Moderator
Posts: 23723
Joined: Thu May 23, 2002 2:01 am
Contact:

Re: head stud pcd

Post by Marc » Mon Jan 16, 2017 4:27 pm

Found this, FWIW: http://ultimateaircooled.com/engines/89 ... ttern.html


One of Rocky Jennings' specialities is modifying cases to alter the stud spacing, he probably has all the dimensions on hand (if not committed to memory)...http://rockyjennings.com/


http://rockyjennings.com/images/shop%20pics%201373a.jpg

bugtub
Posts: 16
Joined: Thu Mar 20, 2014 2:00 pm
Location: England
Contact:

Re: head stud pcd

Post by bugtub » Wed Feb 01, 2017 5:51 am

thank mark rockyjennings site was one of the first I looked at and if I was closer I would have no hesitation sending my case

Post Reply