VW of Mexico EFI basic set

[Antonio Trejo]

Basic Used Electronic Fuel Injection (EFI) set from mexican Beetles (VW Sedan 1600i 1993-2004 Digifant system) Genuine parts made by Volkswagen of Mexico!

What comes with the used fuel injection basic set?
- 1 x Throttle Body with sensors (used) -TPS and Air Intake Temp-
- 1 x Left end casting (used)
- 1 x Right end casting (used)
- 1 x Intake plenum (used)
- 1 x Gasket kit (new): intake boots (2), injector rubber rings (4) and end casting gaskets (2).

-Total price: $299 USD
Plus shipping cost by FedEx ($49 USD to the US, FedEx worldwide shipping available)
More extra used/new Sedan 1600i parts in stock: injectors, fuel pumps, Digifant relays, Electronic Control Units, Electronic distributors, temp sensors, wiring harness, fuel rails, alterator stands, gaskets...

Antonio Trejo
email: [email protected]

Parts VW
Mexico City
"From Volkswagen of Mexico factory..."

[vwjim]

What's the current UK shipping rate please?

[mrblyoung]

Current dollar to GBP is .6733.

$299 x .6377 = 190.6723 GBP.

I had some time to burn. Haha

[vwjim]

Thanks, but it was the cost of the shipping to the UK that I'm after thanks as the advert only mentions US shipping.

Cheers.

[Antonio Trejo]

More late genuine mexican VW Sedan EFI parts in stock:
Inyector rails.

Alternator stand for DP intake mainfold.



Antonio Trejo
Manager
Parts VW
"From Volkswagen of Mexico factory..."
Mexico City

E-Mail contact: [email protected]
Facebook: https://www.facebook.com/parts.vw.3

[champagne superbeetle]

Are complete engines still available?

[karmanghia]

Please tell me where to buy an oil filter for a 1600 cc beetle 2001 thanks R Driver Austin Tx

[gin23deluxe]

Hi how you supposed to run this without an ecu an loom set up. Reason I ask is because I have one
Do u sell loom or harnesses
Cheers mark

[gin23deluxe]

Oh an an ecu

[Chip Birks]

Hi how you supposed to run this without an ecu an loom set up. Reason I ask is because I have one
Do u sell loom or harnesses
Cheers mark

I bought a set from Antonio almost a decade ago. I added my own stand alone ecu and it worked great. You don't need the mexican vw ecu for this setup to work.

[gin23deluxe]

Hi chip you could you tell me what you used
cheers mark

[Chip Birks]

I just used a Megasquirt 2 setup. Super basic, but worked really well at the time.

[Piledriver]

Mario sells ready to go std case MS2-extra and Microsquirt harnesses for that setup at least.