Selection of my cars from 1978 to today, more coming

Frallan · Post by **Frallan** » Sat Mar 14, 2009 3:39 am

One of my new double 2,5" inlet boxes.
No I did not put all the finishing touches to them.....but I am sure they will work really good.
I will probably re-paint them and finish it professionally in same Porsche RS blue color as the car, or redo them in CF, one day.

Frallan · Post by **Frallan** » Mon Apr 20, 2009 8:12 am

Finally a few hours back home and some progress.
Exhaust and muffler is now above the gearbox. Will be wrapped for insulation and box around it.
Secondary CF muffler will hang under the bumper for final touch.

I also got myself a vacuum pump from Star.

Frallan · Post by **Frallan** » Sun May 03, 2009 4:54 am

So, some progress at the lathe.
Took the CB HEI distributor and built the hall trigger in to the double distributor.
A lot of mini turning and spacers plus thinking.
Well today I can say that when ready it will be really good.
This is peek view only.
Will let you know when I have run it running on the distributor test bench, and then of course if it triggers both the Mallory and the 2nd spark Pertronix box simultanously.

Frallan · Post by **Frallan** » Sat May 09, 2009 5:19 am

Finally got some mill and lathe time in Pakistan so now I look forward to going back to Sweden for mounting this hub and also finalizing the exhaust and fuel injection mods.

Frallan · Post by **Frallan** » Thu May 28, 2009 2:37 pm

Now spending some time in Sweden so here is the latest progress.

Frallan · Post by **Frallan** » Thu Jun 04, 2009 12:42 pm

The irbox taking form.
Insulated with heat insulating cloth.

Frallan · Post by **Frallan** » Sun Jun 07, 2009 12:48 pm

Intake and fresh air inlets ready.
A lot of hoses running in the engine compartments and even more around the Naca ducts and air filter inbox.

Frallan · Post by **Frallan** » Thu Jun 11, 2009 8:18 pm

Small progress on wheel side.
1,5-2 kg weight saving on each wheel by changing from VW steel to BMW aluminium.
Look like a steel rim but it is not.
Later when I clean it up and paint it, it will look nice too.

Also got my slitted and drilled discs in place that have been lying around since last year but unfortunately not had time to install until now.

Frallan · Post by **Frallan** » Thu Jun 25, 2009 12:13 pm

Just measured and came up with the following.
Mangels steel 5,5 x 15" 8,1 kg
BMW al rim 6 x 15" 5,9 kg
That is 2,2 kg saving per rim.
Each new brake disc back is 1 kg lighter.
I have saved 11 kg by these changes and it is stock rims.
Not bad.

Frallan · Post by **Frallan** » Sun Jun 28, 2009 10:40 pm

...and again a picture of the engine bay with almost everything in place.
Some linkage and some nice fabricated rear apron will be good to have.
This is it for today.

keirnbug · Post by **keirnbug** » Wed Jul 22, 2009 12:26 pm

Heyya Frallan, nice reading and interesting stuff all of it, and since we are practically neigbhours I would love to stop by some time for a cup of zoegas and a chat.

Frallan · Post by **Frallan** » Wed Jul 22, 2009 1:02 pm

Hi, so were are you located?
Why do you not come to Knutstorp on Monday?
I/we have rented the track full day. Approximately 30 cars in the morning and another 20 in the afternoon.
Not ACVW but a huge mix of other nice cars.
Starting 9 and finishing at 4.

keirnbug · Post by **keirnbug** » Wed Jul 22, 2009 1:08 pm

I live just outside of Lund, Hjärup actually, and I would love to come, but there is the small issue of work, I maybe could get it sorted somehow and have a visit. Would be great !!

Frallan · Post by **Frallan** » Wed Jul 22, 2009 1:16 pm

Cool.

You can reach me on [email protected] or call me on 0733-361998 but to be honest, now the coming days until next week, I am busy and manging minute by minute to get the car ready and at the same time keep kids and wife as a family during vacation time.
Hope to see you next week.

blitzvw · Post by **blitzvw** » Thu Jul 30, 2009 5:46 am

Hi,

If you don't mind my asking, from what model BMW are those wheels from?