EC vs. GA case

bj · Post by bj » Sat Aug 26, 2006 9:37 pm

are these the same when ordering the gasket kit for the 914? i'm getting ready to place an order from jake.

thanks

bj

MASSIVE TYPE IV · Post by **MASSIVE TYPE IV** » Sat Aug 26, 2006 9:45 pm

what heads do you have? The gasket set for Porsche 3 stud heads would be the same one for the 2.0 GA case 914.

bj · Post by bj » Sat Aug 26, 2006 10:15 pm

actually, i have some clean 1.8s and an awsome pair of 2.0s (0 cracks) as well the machine shop was trying to get me to sell them

. i'm not sure which way i want to go right now. going to build a 2056 for my first build. maybe 2270 later on when i get more confidence.

suggestions on the heads? i think i know what you'll say though...

will also like to ask you for a suggestion on a CAM too.

street driven, daily, type 1 bug (maybe ghia later), power between 2000-5500 rpm..

i already have my wish list from you site. still have to contact either len or adrian to rebuild my heads.

thanks again jake.

bj

MASSIVE TYPE IV · Post by **MASSIVE TYPE IV** » Sun Aug 27, 2006 8:10 am

Gotta make the decision on heads first!

bj · Post by bj » Sun Aug 27, 2006 11:04 pm

if i rebuild the 2.0 heads, they will probably be just a stock rebuild, if the 1.8s are rebuilt, they will be somewhat stock but bigger valves a bit of porting/polishing. nothing crazy.

anyhow, what would you suggest? i'm open for ideas.

thanks jake.

bj