Shoptalkforums.com

Posted: **Wed Aug 04, 2004 9:21 am**

There's no way the sender will fit in the stock location so I need to buy the flexible extension. Where is the best place to clamp the sender to?

Posted: **Wed Aug 04, 2004 9:24 am**

hmmn, I would say around the manifold area on the left bank.. Make sure you run a ground wire to the sender also, sometimes that hose does not give an adequate ground and it will read low pressure when its really not.

Posted: **Wed Aug 04, 2004 9:45 am**

I'm using the extension kit from John

With a VDO sensor, lack of ground causes the meter to peg. I had that problem at first. An aligator clip has it working for me at the moment. Once I make a nice mounting bracket out of brass and braze it to the M10x1->AN adapter and bolt it to the compartment wall, I should be good.

Posted: **Wed Aug 04, 2004 12:31 pm**

yep, VDO used to make a relocation kit that included a nice galvanized metal clamp that you would bolt to a suitable ground but they don't anymore.

Posted: **Wed Aug 04, 2004 6:16 pm**

i have it in stock:

http://www.germansupply.com/xcart/custo ... ctid=16240

Posted: **Wed Aug 04, 2004 7:44 pm**

ours is stainless steel braided so doesn't require a ground due to a rubber hose.

John
Aircooled.Net Inc.

Posted: **Wed Aug 04, 2004 8:07 pm**

John,I have had to use another ground on a few of your hoses.. Not a big deal, though..

Posted: **Thu Aug 05, 2004 4:44 pm**

perhaps, but BEATS RUBBER.

John
Aircooled.Net Inc.

Posted: **Thu Aug 05, 2004 5:01 pm**

Give us a mounting bracket and your relocation kit is perfect, IMHO.

Posted: **Thu Aug 05, 2004 5:30 pm**

Yep, it does...

Posted: **Thu Aug 05, 2004 7:13 pm**

I've seen John's hose before so I think I'll stick with him.

Sorry Punkin.

John, you've got an order.

Posted: **Thu Aug 05, 2004 8:46 pm**

ok Davy, I'll work on that over the weekend

John
Aircooled.Net Inc.

Posted: **Fri Aug 06, 2004 8:41 am**

BajaT4 wrote:I've seen John's hose before so I think I'll stick with him. ............

BUWAHAHAHAHAHAHHHHAHAHAHA!

Am I the only one amused?

Don

Posted: **Fri Aug 06, 2004 9:07 am**

I'd like to think my hose is superior to most.

John
Aircooled.Net Inc.

Posted: **Fri Aug 06, 2004 9:12 am**

JohnConnolly wrote:I'd like to think my hose is superior to most.

John
Aircooled.Net Inc.

BUWAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHA!

You're KILLIN me John!

Don

Shoptalkforums.com

Oil Pressure Sender with DTM and Mallory

Oil Pressure Sender with DTM and Mallory