BTW, seam welding the frame horns alone does not make it.
It helps some, but proper triangulation is much better.
I'm looking at adding (tubular) frame horns to my late square to free up room at the back for... other stuff... but the whole brace/framehorn setup will be removable with the rear torsion (as stock) at least, may bolt in entirely.
(sometimes just welding everything in place is the easy way out)
Anyone making a kafer bar for sale has to build in some adjustment, without some adjustment it wouldn't fit most of the cars out there. Everything is at least somewhat tweaked by now.
Rear suspension, engine, and trans. bracing points
- Piledriver
- Moderator
- Posts: 22520
- Joined: Sat Feb 16, 2002 12:01 am
Re: Rear suspension, engine, and trans. bracing points
Addendum to Newtons first law:
zero vehicles on jackstands, square gets a fresh 090 and 1911, cabby gets a blower.
EZ3.6 Vanagon after that.(mounted, needs everything finished) then Creamsicle.
zero vehicles on jackstands, square gets a fresh 090 and 1911, cabby gets a blower.
EZ3.6 Vanagon after that.(mounted, needs everything finished) then Creamsicle.