Ignition only table?

andy198712 · Post by **andy198712** » Mon Dec 01, 2014 4:53 am

still running strong, no issues what so ever

supaninja · Post by **supaninja** » Mon Dec 08, 2014 6:42 pm

That's awesome Andy!

andy198712 · Post by **andy198712** » Tue Dec 09, 2014 12:10 pm

supaninja wrote:That's awesome Andy!

Loving it!

i have enabled the choke a tiny bit as its getting cold her, its not really cold, but wet cold, if that makes sense so we get more carb icing i find.

either way, spot on!

looking to finish my long term 2110 and fire up those GSXR TBI's maybe around the new year which will be cool!

andy198712 · Post by **andy198712** » Fri Nov 06, 2015 7:59 am

Retired that engine now for a well deserved rebuild while my 2110 is in the car

Marvel · Post by **Marvel** » Mon Jan 16, 2017 11:39 am

How do we think this map would run on a mild 1776 with W100 cam, standard heads and 36DRLA's? It advances much quicker than mine and the vacuum advance is more. I will try it but would appreciate comments before I do.

andy198712 · Post by **andy198712** » Thu Jan 19, 2017 2:29 am

tame down a bit for a safe start and build it up

Marvel · Post by **Marvel** » Wed Jan 25, 2017 10:03 am

Thanks I'll give it a go. What was the limiting factor for advance - detonation, head temperature, power, fuel economy?

andy198712 · Post by **andy198712** » Wed Jan 25, 2017 2:39 pm

stock 1200 had really low compression so can get away with alot! i didnt hit the limit but didnt want too

Shoptalkforums.com

Ignition only table?

Re: Ignition only table?

Re: Ignition only table?

Re: Ignition only table?

Re: Ignition only table?

Re: Ignition only table?

Re: Ignition only table?

Re: Ignition only table?

Re: Ignition only table?