Mini Cam Sync
- MarioVelotta
- Posts: 4083
- Joined: Wed Mar 12, 2003 12:01 am
Mini Cam Sync
I have been working on a small sized cam sync. I'm tired of trying to find good Vanagon hall based dizzys to modify and the CB VR based unit is just absurdly large. I haven't had them made yet but started getting pasts and doing some testing.
Here is what the assembled product will look like
With all the part having to be drawn, you are able to explode the assembly to show the internals. I am making a couple of changes but this but it gives you an idea of what is going on.
I've already started to get some parts in
Like these tiny magnets to trigger the hall sensor. It's sooo small.
And finally this morning I started some preliminary testing of the parts. Can't wait until these can get put together!
Here is what the assembled product will look like
With all the part having to be drawn, you are able to explode the assembly to show the internals. I am making a couple of changes but this but it gives you an idea of what is going on.
I've already started to get some parts in
Like these tiny magnets to trigger the hall sensor. It's sooo small.
And finally this morning I started some preliminary testing of the parts. Can't wait until these can get put together!
The Dub Shop
[email protected]
1600 ITB NA - 18sec
1600 Supercharged - 13psi - 15.40 @ 84.66mph
1600 Turbo - 185hp 250tq!! Going for 200
2276 Turbo - 15psi - 11.537 @ 115.74mph
Facebook-Tech-Store
[email protected]
1600 ITB NA - 18sec
1600 Supercharged - 13psi - 15.40 @ 84.66mph
1600 Turbo - 185hp 250tq!! Going for 200
2276 Turbo - 15psi - 11.537 @ 115.74mph
Facebook-Tech-Store
- Volky
- Posts: 306
- Joined: Tue Nov 10, 2009 4:39 pm
Re: Mini Cam Sync
Hi mario,
Nice piece. Post the results when done.
Nice piece. Post the results when done.
1970 VW Beetle with 2109cc turbo with MS-II v3.0, wasted spark, electronic boost controller, dual table, launch control and 3.88 tranny. All done by me... t03 running 48lb. Injectors, Intercooler, Water/Meth injection at 15psi.
-
- Posts: 301
- Joined: Tue May 28, 2002 12:01 am
Re: Mini Cam Sync
When you have these to market, Shut up and take my money!
- aircooledtechguy
- Posts: 1709
- Joined: Sun Oct 28, 2001 1:01 am
Re: Mini Cam Sync
That looks OUTSTANDING!! If you need a local motor to "test" this on, I'll have a fresh 2316cc type-4 that will need one in the next few months. . .
- MarioVelotta
- Posts: 4083
- Joined: Wed Mar 12, 2003 12:01 am
Re: Mini Cam Sync
Thanks everyone
I hope to have more parts in soon and get some stuff machined soon after. I would think in the next few weeks I'll have something in hand. It's sure exciting to develop new products! Especially ones that fill such a large gap in our EFI community.
I hope to have more parts in soon and get some stuff machined soon after. I would think in the next few weeks I'll have something in hand. It's sure exciting to develop new products! Especially ones that fill such a large gap in our EFI community.
The Dub Shop
[email protected]
1600 ITB NA - 18sec
1600 Supercharged - 13psi - 15.40 @ 84.66mph
1600 Turbo - 185hp 250tq!! Going for 200
2276 Turbo - 15psi - 11.537 @ 115.74mph
Facebook-Tech-Store
[email protected]
1600 ITB NA - 18sec
1600 Supercharged - 13psi - 15.40 @ 84.66mph
1600 Turbo - 185hp 250tq!! Going for 200
2276 Turbo - 15psi - 11.537 @ 115.74mph
Facebook-Tech-Store
-
- Posts: 301
- Joined: Tue May 28, 2002 12:01 am
Re: Mini Cam Sync
Hey Mario,
Were you planning on coming up to Vancouver for gcvws?
Were you planning on coming up to Vancouver for gcvws?
- Devastator
- Posts: 3493
- Joined: Tue Nov 06, 2007 6:51 am
Re: Mini Cam Sync
Cool!
Devastator's Build Thread
Sandrail
2.4 liter, supercharged Chevy Ecotec
"If everything seems under control, you're just not
going fast enough."
Mario Andretti
Sandrail
2.4 liter, supercharged Chevy Ecotec
"If everything seems under control, you're just not
going fast enough."
Mario Andretti
- Devastator
- Posts: 3493
- Joined: Tue Nov 06, 2007 6:51 am
Re: Mini Cam Sync
Are you considering a "sight window" for setting valves? I know Pile has mentioned wanting one on other posts.
Devastator's Build Thread
Sandrail
2.4 liter, supercharged Chevy Ecotec
"If everything seems under control, you're just not
going fast enough."
Mario Andretti
Sandrail
2.4 liter, supercharged Chevy Ecotec
"If everything seems under control, you're just not
going fast enough."
Mario Andretti
-
- Posts: 137
- Joined: Tue Jun 18, 2013 11:24 am
Re: Mini Cam Sync
Hurry up and make these while I still have money to buy one.
- MarioVelotta
- Posts: 4083
- Joined: Wed Mar 12, 2003 12:01 am
Re: Mini Cam Sync
Trying to make it up Sunday morningMichael wrote:Hey Mario,
Were you planning on coming up to Vancouver for gcvws?
Hadn't really considered anything like that. It would be easy to to watch for the trigger on the computer to know when it's at #1 TDC though.Devastator wrote:Are you considering a "sight window" for setting valves? I know Pile has mentioned wanting one on other posts.
I'm taking orders for the second set if that interests you. Message me so we can discuss.foreverska wrote:Hurry up and make these while I still have money to buy one.
The Dub Shop
[email protected]
1600 ITB NA - 18sec
1600 Supercharged - 13psi - 15.40 @ 84.66mph
1600 Turbo - 185hp 250tq!! Going for 200
2276 Turbo - 15psi - 11.537 @ 115.74mph
Facebook-Tech-Store
[email protected]
1600 ITB NA - 18sec
1600 Supercharged - 13psi - 15.40 @ 84.66mph
1600 Turbo - 185hp 250tq!! Going for 200
2276 Turbo - 15psi - 11.537 @ 115.74mph
Facebook-Tech-Store
-
- Posts: 137
- Joined: Tue Jun 18, 2013 11:24 am
Re: Mini Cam Sync
Messaged.MarioVelotta wrote:I'm taking orders for the second set if that interests you. Message me so we can discuss.
- MarioVelotta
- Posts: 4083
- Joined: Wed Mar 12, 2003 12:01 am
Re: Mini Cam Sync
Back at ya~
The Dub Shop
[email protected]
1600 ITB NA - 18sec
1600 Supercharged - 13psi - 15.40 @ 84.66mph
1600 Turbo - 185hp 250tq!! Going for 200
2276 Turbo - 15psi - 11.537 @ 115.74mph
Facebook-Tech-Store
[email protected]
1600 ITB NA - 18sec
1600 Supercharged - 13psi - 15.40 @ 84.66mph
1600 Turbo - 185hp 250tq!! Going for 200
2276 Turbo - 15psi - 11.537 @ 115.74mph
Facebook-Tech-Store
- MarioVelotta
- Posts: 4083
- Joined: Wed Mar 12, 2003 12:01 am
Re: Mini Cam Sync
Update:
Here is the new version body with a hex top and enough material to clear a billet hold down clamp.
The shafts have been made up and look great! Here they are in the drill jig.
And I have the PCB's done as well
So close!!!
Here is the new version body with a hex top and enough material to clear a billet hold down clamp.
The shafts have been made up and look great! Here they are in the drill jig.
And I have the PCB's done as well
So close!!!
The Dub Shop
[email protected]
1600 ITB NA - 18sec
1600 Supercharged - 13psi - 15.40 @ 84.66mph
1600 Turbo - 185hp 250tq!! Going for 200
2276 Turbo - 15psi - 11.537 @ 115.74mph
Facebook-Tech-Store
[email protected]
1600 ITB NA - 18sec
1600 Supercharged - 13psi - 15.40 @ 84.66mph
1600 Turbo - 185hp 250tq!! Going for 200
2276 Turbo - 15psi - 11.537 @ 115.74mph
Facebook-Tech-Store
-
- Posts: 268
- Joined: Tue May 01, 2012 9:27 am
Re: Mini Cam Sync
Sweet! I may be in line to buy one! The crank sensor is still rock solid!
1981 Volkswagen Vanagon Westfalia - air-cooled Type4 1970cc CV (hydraulic lifters, 42x36 valves, stock cam, microSquirt FI)
1993 Ford F-250 XL LWB Extended Cab 7.3L IDI
1993 Ford F-250 XL LWB Extended Cab 7.3L IDI