I bought some generic spark plug wires figuring I'd build wires for my IGN-1As One end already has an L shaped boot on it which fits swimmingly on the IGNs but none of the contacts that go on the other side snap on to the end of my spark plug.
What are my options here? I've been looking around but a lot of places just want to sell me wires for the dizzy. Is there any place that will sell me an uncripmed spark plug end with the boot?
Spark plug wires IGN-1As
-
Chip Birks
- Posts: 4006
- Joined: Wed Mar 12, 2008 5:59 pm
Re: Spark plug wires IGN-1As
I've used msd ends in the past. Worked great.
-
Steve Arndt
- Posts: 7404
- Joined: Sat Mar 10, 2001 12:01 am
Re: Spark plug wires IGN-1As
CB Performance Magnaspark wires work well and are affordable.
Steve
My Baja Build
My Baja Build
-
Redline Weber
FireCore 50 Spark Plug wires IGN-1As
Remember this coil has a secondary output tower as is in a normal sparkplug.
A normal product noted for sparkplug boot/terminal replacement will work.(both ends)
Now, we make the FireCore 50 wire with our boots/terminals.
One can provide wire lengths/samples for a quote/order.
Just call Rick G. at Firecore/Redline/Worldpac/Steve A./any other dealer not mentioned.
Lance
A normal product noted for sparkplug boot/terminal replacement will work.(both ends)
Now, we make the FireCore 50 wire with our boots/terminals.
One can provide wire lengths/samples for a quote/order.
Just call Rick G. at Firecore/Redline/Worldpac/Steve A./any other dealer not mentioned.
Lance