knock sensor
-
dcd
- Posts: 51
- Joined: Mon Sep 07, 2009 9:33 am
knock sensor
hi im planing to fit knock sensor to my 2276cc turbo engine which going to run with mega squirt 2 the question is where to fit the knock sensor any pic be applicable
-
jhoefer
- Posts: 195
- Joined: Wed Oct 05, 2011 2:30 pm
Re: knock sensor
Most common place I've seen is bolted through the top case webbing near the flywheel: http://www.shoptalkforums.com/viewtopic ... 5#p1047995
That's a type 4, but the location is similar to the type 1. Could even use the open hole just above there.
That's a type 4, but the location is similar to the type 1. Could even use the open hole just above there.