Magnaspark crank trigger question.

Mattitude · Post by **Mattitude** » Mon Feb 16, 2015 6:08 am

I'm having some issues starting the engine I just built and im wondering if it has to do with my magnaspark crank trigger setup. I have it all setup, I have the gap right on the crank sensor and it set on correct tooth when at TDC. I have spark and I have fuel but I don't have any fire at all. I also have the ECM on the preset map for duel carbs. The engine isn't even trying to start. Is there anything you guys can think of that might be the issue?

jhoefer · Post by **jhoefer** » Mon Feb 16, 2015 10:30 am

Plug wires in wrong order?

Steve Arndt · Post by **Steve Arndt** » Mon Feb 16, 2015 11:12 am

Do you get an RPM signal on the laptop screen while cranking the engine?

Mattitude · Post by **Mattitude** » Thu Feb 26, 2015 3:14 pm

jhoefer wrote:Plug wires in wrong order?

Double checked plug wires. All is it the right order. I wish that was the issue haha.

Mattitude · Post by **Mattitude** » Thu Feb 26, 2015 3:15 pm

Steve Arndt wrote:Do you get an RPM signal on the laptop screen while cranking the engine?

Yeah the laptop is reading the RPM signal. I'm pretty stumped

jhoefer · Post by **jhoefer** » Thu Feb 26, 2015 3:49 pm

What did the timing light show?

Shoptalkforums.com

Magnaspark crank trigger question.

Magnaspark crank trigger question.

Re: Magnaspark crank trigger question.

Re: Magnaspark crank trigger question.

Re: Magnaspark crank trigger question.

Re: Magnaspark crank trigger question.

Re: Magnaspark crank trigger question.