44mm HPMX jetting?
Posted: Fri Aug 08, 2014 4:20 pm
Hi All
I've got hold of a pair of 44 HPMX's. They're going on a 2007cc with a 120 cam, mild 044 heads(40x35) and 9.5-1 cr. Carbs are 44's with 32mm venturis instead of 36mm.
Okay the question is, what jetting should I start with? Also at sea level.......
I've got hold of a pair of 44 HPMX's. They're going on a 2007cc with a 120 cam, mild 044 heads(40x35) and 9.5-1 cr. Carbs are 44's with 32mm venturis instead of 36mm.
Okay the question is, what jetting should I start with? Also at sea level.......
