Stock FI End Castings from CBPerformance

Moderator: Tom Notch

Post Reply
User avatar
kangaboy
Posts: 745
Joined: Wed Jan 22, 2003 3:01 am
Location: St. Louis, MO

Stock FI End Castings from CBPerformance

Post by kangaboy » Wed Dec 06, 2017 4:16 pm

Hey all. I know during my months of research trying to build my FI setup, I can across several others looking for stock FI end castings to no avail. Seems CB got the hint and decided to put these back into production again.

http://www.cbperformance.com/product-p/7360.htm
'74 Standard- 1776T, MS3X3
'76 Westy- Stock 2.0L L-Jet

User avatar
ps2375
Posts: 302
Joined: Mon Aug 18, 2014 10:04 am
Location: Meridian,ID

Re: Stock FI End Castings from CBPerformance

Post by ps2375 » Wed Dec 06, 2017 5:04 pm


User avatar
kangaboy
Posts: 745
Joined: Wed Jan 22, 2003 3:01 am
Location: St. Louis, MO

Re: Stock FI End Castings from CBPerformance

Post by kangaboy » Wed Dec 06, 2017 10:30 pm

The kit that Antonio sells is the Mexican Kit. The endcastings that CB sells is the original DP endcastings with the injector bungs in it. They discontinued it for a while.
'74 Standard- 1776T, MS3X3
'76 Westy- Stock 2.0L L-Jet

User avatar
ps2375
Posts: 302
Joined: Mon Aug 18, 2014 10:04 am
Location: Meridian,ID

Re: Stock FI End Castings from CBPerformance

Post by ps2375 » Wed Dec 06, 2017 10:47 pm

not sure what the difference is.

User avatar
sideshow
Posts: 3223
Joined: Mon Oct 27, 2003 2:00 pm
Location: suth'ern oraygun yusa
Contact:

Re: Stock FI End Castings from CBPerformance

Post by sideshow » Thu Dec 07, 2017 7:47 am

The center chunk you want to use;
Carbureted beetle style --> CB end castings
L-Jet beetle style --> OEM steel end castings
Mexican FI --> MX end castings

Flexibility wise the carbureted intakes are the most common and diverse (options), followed by the dual IDF pattern.
Yeah some may call it overkill, but you can't have too much overkill.

Post Reply