I was thinking about building a new intake using these parts. but not sure if I should get the "y" or the "t" center section.
this would attach to my existing end castings from CB performance.
motor is squirted 1776 , with mild cam, and 044 heads.
jenvey 45mm short TB
90 or 150mm air horn
and center section from AJ simms,
new intake for my 1776
-
Thorkhild
- Posts: 393
- Joined: Mon Mar 19, 2001 12:01 am
new intake for my 1776
You do not have the required permissions to view the files attached to this post.
-
Dale M.
- Posts: 1673
- Joined: Mon Oct 05, 2009 8:09 am
Re: new intake for my 1776
If you are looking for single throat TB consider something like one off 2.5L EFI Jeep... IT has TPS, MAP sensor and IAC solenoid (valve) already built in as one compact unit...
Better PIC but with MAP sensor removed...
All sensors are pretty much 5 volt industry standard....
Dale
Better PIC but with MAP sensor removed...
All sensors are pretty much 5 volt industry standard....
Dale
"Fear The Government That Wants To Take Your Guns" - Thomas Jefferson
1970 "Kellison Sand Piper Roadster"
1970 "Kellison Sand Piper Roadster"
-
mads b (dk)
- Posts: 85
- Joined: Fri Feb 08, 2013 11:48 am
Re: new intake for my 1776
Where do you buy 2.5 efi jeep trottle bodies?
Samsung S5
Samsung S5
-
Thorkhild
- Posts: 393
- Joined: Mon Mar 19, 2001 12:01 am
Re: new intake for my 1776
what size is that TB ?
-
Dale M.
- Posts: 1673
- Joined: Mon Oct 05, 2009 8:09 am
Re: new intake for my 1776
Wrecking yard, e-bay, rock auto, Jeep parts web sites, midnight supply to neighbors Jeep ...Well maybe not...mads b (dk) wrote:Where do you buy 2.5 efi jeep trottle bodies?
Samsung S5
2.5 liter jeep TB is 48mm, 4.0L is 55mm, 4.0L TB can be modded out to 62mm......
Dale
"Fear The Government That Wants To Take Your Guns" - Thomas Jefferson
1970 "Kellison Sand Piper Roadster"
1970 "Kellison Sand Piper Roadster"