Throttle body ball joint linkage

Moderator: Tom Notch

Post Reply
User avatar
Posts: 121
Joined: Sat Oct 03, 2015 4:58 pm

Throttle body ball joint linkage

Post by sidemarkers » Wed Sep 07, 2016 12:53 am

Who sells an adapter that allows a ball joint style throttle body to mate up to a VW style throttle cable? Thanks in advance.

User avatar
Posts: 21917
Joined: Sat Feb 16, 2002 3:01 am
Location: Van Alstyne, Texas

Re: Throttle body ball joint linkage

Post by Piledriver » Wed Sep 07, 2016 3:27 am

Most auto parts stores, and good hardware stores will have the snap on clip and the ball set up.
Look for one with a setscrew on the side to clamp cable.
If you cant find that type, get one with a small ID and drill and tap, you can mod a short version easily, and having a screw with a head is better than a tiny setscrew... Make the screw as large as reasonably possible for a wider clamp area and less chance of stripping.
I, for one, regularly embrace our new robot overlords, as I am the guy fixing the robots...

Posts: 3412
Joined: Fri Feb 16, 2007 12:28 am

Re: Throttle body ball joint linkage

Post by Clonebug » Wed Sep 07, 2016 9:13 pm

Model airplanes use a connector that goes from cable to threads. You can solder those ends on the cable. They come in different thread sizes and pitches. ... LXD924&P=7

Here is one that is 4-40 thread. They also have ball connectors.

I used one of these before and they worked good.
Stripped66 wrote:The point wasn't to argue air temps with the current world record holder, but to dispel the claim that the K03 is wrapped up at 150 HP. It's not.

Post Reply