Shoptalkforums.com

hello guys,
changing from 009 to wasted spark..
I will use a 36-2 trigger wheel ( 2 missing teeth are next to each other )
Is the tooth 1 angle still 80 degrees?
I am a bit confused with this weird trigger wheel

( I used a 36-1 before and used 80 degrees there )

thanks, Peter

Works the same, still need to verify with timing light.

I'm running a 36-2 ATM in a 009, was supposed to be a 36-1 but had one of the settings wrong on my welder...
Its a steel spur gear from a gas rc truck.

A 72 tooth will even fit...

Piledriver wrote: ↑Sun Apr 02, 2017 11:45 am Works the same, still need to verify with timing light.

I'm running a 36-2 ATM in a 009, was supposed to be a 36-1 but had one of the settings wrong on my welder...
Its a steel spur gear from a gas rc truck.

A 72 tooth will even fit...72-tooth-in-009.JPG

thanks a lot!
your setup is very nice!
gives my ideas!!

Peter