Megasquirt Photo Album

[raul arrese]

Nice work everyone. Here's my setup that I just finished last week.
2276cc


Under the back seat location (MS2 v3.57, Ford EDIS, Relay Board) Not as clean as others and some tidying up still to do.

Nice !!! megasquirt all the way !!!!!!!!!1

[MarioVelotta]

Nice work everyone. Here's my setup that I just finished last week.
2276cc


Under the back seat location (MS2 v3.57, Ford EDIS, Relay Board) Not as clean as others and some tidying up still to do.

Woot!

Can I get a link to a larger pic of your engine bay

[veloracer]

Nice work everyone. Here's my setup that I just finished last week.
2276cc


Under the back seat location (MS2 v3.57, Ford EDIS, Relay Board) Not as clean as others and some tidying up still to do.

Woot!

Can I get a link to a larger pic of your engine bay

Certainly http://i241.photobucket.com/albums/ff21 ... 083120.jpg, although not as neat and tidy as some of the members on here (including your badass setup Mario )

[MarioVelotta]

Bump

[dorkie]

I hope an in-process megasquirt isn't out of line for this photo album.

[MarioVelotta]

Heck no! Keep us updated

[silkvw]

Since this thread is going again, I'll add a photo of my first time effort:



And the battery side:
I plan to do some clean up soon, make it look better. All the photos I have seen here have helped a lot.

[yellow_snocone]

FB_IMG_1495674018426.jpg

Almost finished with the board just gotta install the pwm goodies.

Nice to be able to see how everyone has their system setup. Hoping i can do just as good.

[buildabiggerboxer]

Microsquirt, 2.5 wasserboxer ignition control only, TPS on Dellorto 48s. Denso Logic COPS, home made Dry sump pully trigger wheel and VR sensor, easy access was key, i cant be banging around roll cage and door bars 5 minutes before call up so everything is simple and easy to see and get at in the engine bay, lots of LED inline fuses.

[buildabiggerboxer]

Further to Wasserboxer 2.5. Microsquirt and minimal electrics and DS pulley VR instal. clip
in Screening against uk weather and any stray EMI covers it all in when use.

[Bruce.m]

Got a part number for the COPs? Will be interesting to see if the simple support brackets are enough in the tough racing environment.

[buildabiggerboxer]

Im not near the workshop for 3 days yet but the COP part number i recently posted up for another interested party, the trick with the COP mounting is to be sure the braket pulls them down enough to snug the seal down tightly on the plug boss, this acts as a big steady factor i found, ill be drilling them lighter yet at some point. please note these COPS wont clear manifolds on T1 heads with non canted spark plugs.

[buildabiggerboxer]

6 months protective layer on #311, sleep over lad, need to get some track time logged..

[MarioVelotta]

Thanks for sharing Buildabiggerboxer!

[buildabiggerboxer]

Most welcome, love the albums.