Slick motorcycle ITB mounts for IDF manifolds

[djb]

Can anyone confirm the year range for the Honda VFR800 TB's? The ones I am finding on Ebay do not look like the images posted in this thread.

Also would if someone could confirm the part number of the Mikuni adapters?

Thanks!

David

[TZepeSH]

You are looking for 99-01 throttle bodies. About the rubber boots, I can not confirm. I milled the IDF manifolds such that the throttle bodies go in by 10mm, and used an O-ring to seal. And some little steel plates to fix the throttle bodies down. Sorry no pictures now.

[TZepeSH]

Here is my install. What kind of filters do you plan to use? The IDF K&N type will hit the fuel rail and the air holes are mis-aligned by maybe 10mm. I think that a 20mm spacer would solve the problem I also want to use the original velocity stacks.
viewtopic.php?f=1&t=138151&sid=cfe8c2b3 ... &start=180

[chickensoup]

where is that trigger wheel and cps from?

thanks

[TZepeSH]

Trigger wheel is from Mario (thedubshop) and the CPS is from CB Performance (because Mario did not have one in stock when I bought the trigger wheel).