anybody with widened fiberglass fenders?

Pooter · Post by **Pooter** » Mon Feb 12, 2007 8:54 pm

If you have widened rear fiberglass fenders, post a picture, and tell me where you go them + any other info. I am on the market for something to cover my 17x9's and i need a lead.

thanks!

David Miskov · Post by **David Miskov** » Tue Feb 13, 2007 3:51 am

I have a couple of pictures I could e-mail you of 3" wider fenders from Creative Car Craft. They are your best bet for fiberglass fenders.

Pooter · Post by **Pooter** » Thu Feb 15, 2007 9:56 am

hmmm... I think that 3" would be a little too wide for me, I need to see some 2" and decide. Thanks anyway!

PW4056 · Post by **PW4056** » Wed Feb 28, 2007 11:33 pm

I have 6cm widen at the rear with 9x17 et55 with 255/40 tyres and with 944t alu trailing arm, still needed 17mm spacer. Fenders were from Kerscher-tuning in Germany. The fenders are great quality but not as strong on the edges like CCC which are rolled, but since going fiber why bother so much.

Laz · Post by **Laz** » Thu Mar 01, 2007 5:07 am

i have 1 1/4 from creative they fit my 9s just fine they are often mistaken for stock.

wrenchnride247 · Post by **wrenchnride247** » Fri Mar 02, 2007 8:12 pm

How's the motor sell'n biz??

MNAirHead · Post by **MNAirHead** » Fri Mar 02, 2007 8:18 pm

If quality counts and budget doesn't matter CCC

I have wider.. what year are you building.

Laz · Post by **Laz** » Sat Mar 03, 2007 5:02 am

How's the motor sell'n biz??

not 2 good i didnt reup my ad on thesamba. i never really got any serious hits. it seemed like everyone wants me to part it out. that doesnt help b/c then im stuck with this and that after all the "i really want that" stuff is gone.plus im sittin b/c i cant build my type4 b/c i dont wanna put any cash of my own.

wrenchnride247 · Post by **wrenchnride247** » Sun Mar 04, 2007 6:07 pm

Laz wrote:
How's the motor sell'n biz??
not 2 good i didnt reup my ad on thesamba. i never really got any serious hits. it seemed like everyone wants me to part it out. that doesnt help b/c then im stuck with this and that after all the "i really want that" stuff is gone.plus im sittin b/c i cant build my type4 b/c i dont wanna put any cash of my own.

I'm sorry to hear that Laz. It would be ashame to part it out. It is bad a$$ like it is! Oh, sorry for hijacking this thread... i'm done

volkdent · Post by **volkdent** » Sun Mar 04, 2007 7:24 pm

CCC all the way, top quality.

Jason

fastmc25 · Post by **fastmc25** » Fri Jul 13, 2007 4:51 pm

volkdent wrote:CCC all the way, top quality.

Jason

I'll second that motion.................16x7's fit well on 1-1/4" wider rear and stock fronts...

Wally · Post by **Wally** » Sun Jul 15, 2007 12:08 pm

Kerscher from germany all the way for me:

(the white car) front +3cm wider outer only, rear +7cm wider inner and outer.

fastmc25 · Post by **fastmc25** » Sun Jul 15, 2007 1:17 pm

Wally wrote:Kerscher from germany all the way for me:

(the white car) front +3cm wider outer only, rear +7cm wider inner and outer.

Yeah me too. I had a set of theirs when i lived in Koln Germany ..

............. Just too expensive to ship to USA............

SuperRSi · Post by **SuperRSi** » Sun Feb 09, 2014 2:38 pm

I am in the process of installing and then repainting my convert. Doing lots of suspension and body work...

SuperRSi · Post by **SuperRSi** » Sun Feb 09, 2014 2:40 pm

Front view...

Shoptalkforums.com

anybody with widened fiberglass fenders?

anybody with widened fiberglass fenders?

Re: anybody with widened fiberglass fenders?

Re: anybody with widened fiberglass fenders?