1303 tube frame in the works
-
- Posts: 114
- Joined: Fri Aug 22, 2003 12:49 pm
1303 tube frame in the works
Started to build a roll cage for the 1303 but then decided to make it a full tube frame. Basically I want to be able to drive the car without the body on. This is the first months progress.
-
- Posts: 163
- Joined: Mon Sep 12, 2005 6:34 am
-
- Posts: 114
- Joined: Fri Aug 22, 2003 12:49 pm
Thanks guys- For the front struts I'm going to cut a plate that is similar to the body and then have an x bar going forward to the frame head and an x bar going from the top of the struts to the control arm brackets. I want this setup to use all the stock suspension points because designing double a arm suspension or some other exotic suspension will take too much time now.
Anybody else with tube frame cars that has some pics? or just roll bars pics too would be great.
Anybody else with tube frame cars that has some pics? or just roll bars pics too would be great.
-
- Posts: 786
- Joined: Tue Jun 20, 2000 12:01 am
My mate has had this one in the shop for a while
http://www.clubvw.org.au/dak_to_the_future.htm
Getting closer - but so is Christmas
http://www.clubvw.org.au/dak_to_the_future.htm
Getting closer - but so is Christmas
-
- Posts: 114
- Joined: Fri Aug 22, 2003 12:49 pm
Ah yes updates. - I had to end up buying a tube bender because some of the piece from the "kit" did not fit. The roof halo and forward bars didn't fit to my liking. I would suggest anyone building a roll cage to buy a tube bender instead of buying a "kit". I will be bending up a new roof halo and forward bars this weekend.
-
- Posts: 10
- Joined: Sun Mar 25, 2007 8:53 pm
Nice stuff! checkout under Suspension and handling section under topic "another circuit racer saying hi" Full tube frame racer.I can send pics to your email of chassis work as well.JVLRacingvw1303 wrote:Thanks guys- For the front struts I'm going to cut a plate that is similar to the body and then have an x bar going forward to the frame head and an x bar going from the top of the struts to the control arm brackets. I want this setup to use all the stock suspension points because designing double a arm suspension or some other exotic suspension will take too much time now.
Anybody else with tube frame cars that has some pics? or just roll bars pics too would be great.
-
- Posts: 10
- Joined: Sun Mar 25, 2007 8:53 pm
ok looks the goods,Just make sure your cage ties in with shell also, for extra stiffness.You would benefit also running the cage piping towards the front of the shell also.If you need pics i can send some pics of my race car to you.Send your email if wanting.vw1303 wrote:Finally some progress...... Re bent the Halo and the Forward bars. I'm going to do the front strut section in aluminum as well as the rear brace.
-
- Posts: 114
- Joined: Fri Aug 22, 2003 12:49 pm
Yeah the cage is going to bolt to as many existing locations on the stock body. Like floor pan bolts, seat belt mounts and I'll prolly throw a few others in there too, plus the i'm using the a new frame head and the rear of the body will bolt to the shock towers.. Yeah post up some pics of your friends cage. I always like to see other peoples creations.
-
- Posts: 163
- Joined: Mon Sep 12, 2005 6:34 am