Cookie cutters on a 1302?

You know, de-chromed, big Porsche rims, Brembos, etc.,... German Look rules!
Post Reply
User avatar
Blake R
Posts: 438
Joined: Fri Apr 08, 2005 11:11 am

Cookie cutters on a 1302?

Post by Blake R » Mon Apr 06, 2009 12:52 pm

Will 15x7 porsche cookie cutters fit all around? I have cip1 tapered springs in the front. I am not opposed to running a little bit of a spacer if needed.

User avatar
Blake R
Posts: 438
Joined: Fri Apr 08, 2005 11:11 am

Post by Blake R » Tue Apr 07, 2009 8:11 am

???

User avatar
fast Ed
Posts: 40
Joined: Tue Mar 17, 2009 5:33 pm

Post by fast Ed » Tue Apr 07, 2009 8:47 am

I believe those are +23 offset, which should clear the tapered springs, but will be at the outer edge (or past it). I'm just getting back in to the VW world, but from what I have seen on a Super, to run 7" wheels on the front, you generally need more positive offset, along with the small diameter coil-over style springs.


cheers
Ed N.

my quite
Posts: 3
Joined: Sat Jan 15, 2011 2:23 pm

Re: Cookie cutters on a 1302?

Post by my quite » Sat Aug 13, 2011 10:48 pm

I'm running cookie cutters on my 1303. they do stick out though. I'm running full 944 front brakes, with custom crx/ 944 struts. the rear are just standard 944 disc.

Post Reply