Making a header for an odd app
- petew
- Posts: 3920
- Joined: Sat Oct 07, 2006 4:05 pm
Re: Making a header for an odd app
There are trikes here, but yeah. Pretty much. Stupid laws.
-
- Posts: 195
- Joined: Mon Feb 09, 2015 4:45 am
Re: Making a header for an odd app
Worked on that tuning a bit. Got a lot closer. Lots better running. Still a bit lean off cam. All the changing blew up all the idle settings, now to run that back down. But anyway....learning as I go.
It did catch me a bit off guard with a second gear wheelie coming on at around 40mph ...
It did catch me a bit off guard with a second gear wheelie coming on at around 40mph ...
- petew
- Posts: 3920
- Joined: Sat Oct 07, 2006 4:05 pm
Re: Making a header for an odd app
Bahaha! That's fantastic.
-
- Posts: 195
- Joined: Mon Feb 09, 2015 4:45 am
Re: Making a header for an odd app
Still tuning and changing things.
Messed with the reversion cans on the collectors.
Good gawd some little things make huge differences.
It now longer has an "off cam" area. Can not rumble and blubber around off can anymore. Just a little and whamo....7500rpm.
It is just getting stronger and stronger. Afraid of breaking the trans now.
Messed with the reversion cans on the collectors.
Good gawd some little things make huge differences.
It now longer has an "off cam" area. Can not rumble and blubber around off can anymore. Just a little and whamo....7500rpm.
It is just getting stronger and stronger. Afraid of breaking the trans now.
You do not have the required permissions to view the files attached to this post.
-
- Posts: 17770
- Joined: Mon Nov 13, 2006 10:17 pm
Re: Making a header for an odd app
A very neat and clean job sir!
Lee
Lee