Exploded Views of Rear Axle Components
- david58
- Moderator
- Posts: 14096
- Joined: Sun Oct 23, 2005 6:14 pm
Exploded Views of Rear Axle Components
Swing Axle Type 1
IRS Type 1
IRS Transmission Rear Suspension Exploded Diagram Posted: Mon Jan 07, 2008 8:32 pm Views: 947 Rating: Not rated
Please Rate It: Rating 1 - Low2345678910 - High
--------------------------------------------------------------------------------
#1 Torsion Bar
#2 Inner Spring Plate Grommet
#3 Spring Plate
#4 Outer Spring Plate Grommet
#5 Spring Plate Caps
#6 Trailing Arm Pivot Bolt (M14x1.5mm threads)
#7 Trailing Arm Bolt Washer
#8 Trailing Arm Pivot Bushings
#9 Trailing Arm
#10 Control Arm Rubber Stop
#11 Inner Axle spacer
#11a Sway-A-Way Axle Spacer
#12 Seal Stub Axle Inner
#13 Control Arm inner snap ring
#14 Inner Control Arm Axle Bearing
#15 Axle Spacer between Bearings
#16 Plastic Emergency Brake cable holder
#17 Outer Control Arm Axle Roller Bearing
#18 Large "O" ring
#19 Small "O" ring
#20 Bearing Cap
#21 Outer Axle Spacer (Seal surface)
#21a Sway-A-Way Axle Spacer Kit
#22 Seal Outer Stub Axle
#23 Bearing Cap Bolts (M10x30)
#23a Spring Washer
#23b Flat Washer
#24 Rear IRS Brake Drum
#24a Lug Bolts
#25 Rear Axle Nut Flanged
#26 Cotter Key Large
#27 Upper Shock Bolt
#27a Nylock 12-1.5mm self locking nut
#28 Rear IRS Shock
#29 Lower Shock Bolt
#29a Nylock 12-1.5mm self locking nut
#30 Rear Axle
#31 CV Bolt
#31 CV Bolt Washer
#32 CV Bolt Plate
#33 CV Axle Boot with Flange
#34 Washer
#35 Constant Velocity Joint
#36 CV Axle circlip
#37 Stub Axle
#38 Grease Cup used in some CVs
#39 Large CV Boot Clamp
#40 CV Boot
#41 Small CV Boot Clamp
IRS Type 1
IRS Transmission Rear Suspension Exploded Diagram Posted: Mon Jan 07, 2008 8:32 pm Views: 947 Rating: Not rated
Please Rate It: Rating 1 - Low2345678910 - High
--------------------------------------------------------------------------------
#1 Torsion Bar
#2 Inner Spring Plate Grommet
#3 Spring Plate
#4 Outer Spring Plate Grommet
#5 Spring Plate Caps
#6 Trailing Arm Pivot Bolt (M14x1.5mm threads)
#7 Trailing Arm Bolt Washer
#8 Trailing Arm Pivot Bushings
#9 Trailing Arm
#10 Control Arm Rubber Stop
#11 Inner Axle spacer
#11a Sway-A-Way Axle Spacer
#12 Seal Stub Axle Inner
#13 Control Arm inner snap ring
#14 Inner Control Arm Axle Bearing
#15 Axle Spacer between Bearings
#16 Plastic Emergency Brake cable holder
#17 Outer Control Arm Axle Roller Bearing
#18 Large "O" ring
#19 Small "O" ring
#20 Bearing Cap
#21 Outer Axle Spacer (Seal surface)
#21a Sway-A-Way Axle Spacer Kit
#22 Seal Outer Stub Axle
#23 Bearing Cap Bolts (M10x30)
#23a Spring Washer
#23b Flat Washer
#24 Rear IRS Brake Drum
#24a Lug Bolts
#25 Rear Axle Nut Flanged
#26 Cotter Key Large
#27 Upper Shock Bolt
#27a Nylock 12-1.5mm self locking nut
#28 Rear IRS Shock
#29 Lower Shock Bolt
#29a Nylock 12-1.5mm self locking nut
#30 Rear Axle
#31 CV Bolt
#31 CV Bolt Washer
#32 CV Bolt Plate
#33 CV Axle Boot with Flange
#34 Washer
#35 Constant Velocity Joint
#36 CV Axle circlip
#37 Stub Axle
#38 Grease Cup used in some CVs
#39 Large CV Boot Clamp
#40 CV Boot
#41 Small CV Boot Clamp
Last edited by david58 on Tue Mar 03, 2009 11:58 am, edited 3 times in total.
- david58
- Moderator
- Posts: 14096
- Joined: Sun Oct 23, 2005 6:14 pm
Re: Exploded Views of Rear Axle Components
Hot, humid air is less dense than cooler, drier air. This can allow a golf ball to fly through the air with greater ease, as there won't be as much resistance on the ball.
-
- Posts: 3391
- Joined: Tue Sep 03, 2002 12:01 am
Re: Exploded Views of Rear Axle Components
As far as the IRS wheel bearings go, when trying to remember their placement, it always helped me to say, "balls with balls"...aka, ball bearing goes closest to CV joint (w/balls).
- david58
- Moderator
- Posts: 14096
- Joined: Sun Oct 23, 2005 6:14 pm
Re: Exploded Views of Rear Axle Components
OK what is the deal with the spacing when you add rear disc brakes into the mix. Is the thickness of the caliper bracket the same as the thickness of the drum backing plate? I don't have pics of the rotors but one of them is trashed the splines are really stretched, the other one is questionable. Does anyone have the specs on the splines?
Hot, humid air is less dense than cooler, drier air. This can allow a golf ball to fly through the air with greater ease, as there won't be as much resistance on the ball.
-
- Posts: 808
- Joined: Sun Sep 20, 2009 4:42 am
Re: Exploded Views of Rear Axle Components
This looks helpful. Any way you could post the same for Type 2 SA? I'm struggling with the trans swap for my 64 bus.
- david58
- Moderator
- Posts: 14096
- Joined: Sun Oct 23, 2005 6:14 pm
Re: Exploded Views of Rear Axle Components
It has redux boxes doesn't it? And should be a small nut..............Stray Catalyst wrote:This looks helpful. Any way you could post the same for Type 2 SA? I'm struggling with the trans swap for my 64 bus.
Hot, humid air is less dense than cooler, drier air. This can allow a golf ball to fly through the air with greater ease, as there won't be as much resistance on the ball.
-
- Posts: 808
- Joined: Sun Sep 20, 2009 4:42 am
Re: Exploded Views of Rear Axle Components
RGBs and large nut - the trans may not be original.
- david58
- Moderator
- Posts: 14096
- Joined: Sun Oct 23, 2005 6:14 pm
Re: Exploded Views of Rear Axle Components
Thrown Hammer as a good thread I think it was called the ultimate gear reduction thread or something like that.
Hot, humid air is less dense than cooler, drier air. This can allow a golf ball to fly through the air with greater ease, as there won't be as much resistance on the ball.
- david58
- Moderator
- Posts: 14096
- Joined: Sun Oct 23, 2005 6:14 pm
Re: Exploded Views of Rear Axle Components
thrown_hammer
http://www.thesamba.com/vw/forum/viewto ... t=ultimate
http://www.thesamba.com/vw/forum/viewto ... t=ultimate
Hot, humid air is less dense than cooler, drier air. This can allow a golf ball to fly through the air with greater ease, as there won't be as much resistance on the ball.
- david58
- Moderator
- Posts: 14096
- Joined: Sun Oct 23, 2005 6:14 pm
Re: Exploded Views of Rear Axle Components
GEAR REDUX INFO
http://www.shoptalkforums.com/viewtopic.php?t=40579
http://www.shoptalkforums.com/viewtopic.php?t=40819
Thing reduction gear adaptors pics
http://www.shoptalkforums.com/viewtopic.php?t=88978
http://www.shoptalkforums.com/viewtopic.php?t=40579
http://www.shoptalkforums.com/viewtopic.php?t=40819
Thing reduction gear adaptors pics
http://www.shoptalkforums.com/viewtopic.php?t=88978
Hot, humid air is less dense than cooler, drier air. This can allow a golf ball to fly through the air with greater ease, as there won't be as much resistance on the ball.
- Marc
- Moderator
- Posts: 23741
- Joined: Thu May 23, 2002 12:01 am
Re: Exploded Views of Rear Axle Components
`63½-`67 were large nut.Stray Catalyst wrote:RGBs and large nut - the trans may not be original.