Carb'd EJ22 into 61 rag

55superbeetle · Post by **55superbeetle** » Sun Jan 15, 2012 3:15 pm

As stated the car is for sale. The owner of the car is trying to buy a house and need the money

http://www.thesamba.com/vw/classifieds/ ... id=1247832

ONEBADBUG · Post by **ONEBADBUG** » Sun Jan 15, 2012 5:22 pm

Sorry if this has been asked already, but what was your source for the trigger wheel? I just found out I cant use the Subaru with my DTA engine management.

55superbeetle · Post by **55superbeetle** » Sun Jan 15, 2012 5:59 pm

I used a 36-1 ford wheel as it was the only wheel compatible with the ignition I used. I'm not familiar with DTA but the stock 7 tooth wheel cam be made into a 4-1 by removing some teeth, you can also use a STI trigger wheel which is a 36-2-2-2 (same wheel as the mazda rx8). I happen to have a stock crank sprocket with a 60-2 wheel that was taken off a motor that was being ran on electromotive if that would help you.

Jeff

ONEBADBUG · Post by **ONEBADBUG** » Mon Jan 16, 2012 5:25 pm

Thanks, let me do some research.

ambrynmc · Post by **ambrynmc** » Tue Jan 17, 2012 8:29 am

In case you wanted to know, the 36-2-2-2 Subaru STI crank trigger wheel part # is 13021AA141. It is about $30.

I found it one day, lost it, and then spent a week trying to find it again....

rusdub · Post by **rusdub** » Mon Aug 31, 2015 6:47 pm

great looking install whats the source for intake manifold...custom? Putting an ej253 in a sand rail any help or discussion would be appreciated....thanks

jimkelly1964 · Post by **jimkelly1964** » Tue Feb 26, 2019 2:42 pm

did the pics go missing or is it just my computer acting funny? i just saved all the pics to my pc just the other day, being worried this might happen.

pic of what i am working on. one of the machine shop guys i work with is going to tap all the holes for me, 4x 3/8 npt on the suby manifolds for vacuum ports and 8x 5/16-18 on the flanges for carbs.

i just realized all pics on this site are LINKED, not actually located on this site's server : (

jim

GS guy · Post by **GS guy** » Wed Feb 27, 2019 6:00 pm

Photobucket images - they wigged out when PB tried to start making everyone give $$ to store their images. Somebody had a software "fix" for this that worked for me. Images show up just fine on my monitor.
I like where you're going on the manifolds. Looks like a very close match-up to the IDF flanges. A little welding, a little grinding and good to go! Just need some throttle bodies and velocity stacks! The IR induction system just looks so right in the back of a Bug - even if it's on a 'Roo!
Jeff

Shoptalkforums.com

Carb'd EJ22 into 61 rag

Re: Carb'd EJ22 into 61 rag

Re: Carb'd EJ22 into 61 rag

Re: Carb'd EJ22 into 61 rag

Re: Carb'd EJ22 into 61 rag

Re: Carb'd EJ22 into 61 rag

Re: Carb'd EJ22 into 61 rag

Re: Carb'd EJ22 into 61 rag

Re: Carb'd EJ22 into 61 rag