MadMike's 'Casper' 76 bug

[madmike]

waiting on my order from Jeg's

[buguy]

We've been getting our Jegs and summit pretty fast down here.

[madmike]

Gal said Friday,, and it came I'm only one state away, so I've never had any issues with delivery's
Going to rain allday so i'm hiding out in the garage today

[buguy]

That's a good way to get some work done!

[madmike]

woke up to snow on the ground & 27* Must be a 'Sign' to finish the 'Snow Injection' all I need to do is plumb in the solenoid & wire it then try and tidy up the spaghetti/wires , seal up the headers,, local kid does a coating called creocoat or something like that anyone heard of it? prolly just a high temp powder coating?
P.s. Gas went down to $1.11

[Schweg]

woke up to snow on the ground & 27* Must be a 'Sign' to finish the 'Snow Injection' all I need to do is plumb in the solenoid & wire it then try and tidy up the spaghetti/wires , seal up the headers,, local kid does a coating called creocoat or something like that anyone heard of it? prolly just a high temp powder coating?
P.s. Gas went down to $1.11

Creocoat is a good solid finish. I know a lot of guys have used it in guns. I am not sure how good it works with heat IE like ceramic coating


Sent from my iPhone using Tapatalk

[madmike]

yea, it's called Cerakote, He said he's done a few Headers

[madmike]

One little 'fitting' 1/8 NPT to 3/32 nipple , not to be found in northern Michigan
Basically a windshield washer hose size,,,, anyone have one laying around?????

[Clonebug]

Never heard of a 3/32nd size nipple.
Post a pic of what you are trying to do.
I used pushloc stainless fittings and 1/4 inch plastic hose. My experiment with heavier hose failed due to the steel fittings I used corroding and plugging my itty bitty 1.0 gph nozzle.
I went back to the 1/4 inch clear hose and it's been working so far.

[madmike]

The control box has a small plastic nipple on it,just tryin to hook it up to the intake end manifoild

[Chip Birks]

Just go with 1/8" that won't be a big stretch

[Clonebug]

It's probably a 3/16ths size.
Look in the Auto parts store where they Keep their vacuum fittings. They might have a reducer from one hose size to another that you can use. Then find a fitting that will work for a bigger hose.

[madmike]

Just thinkin the same thing Flaps did not stock anything close

[madmike]

Found this doohickey in my dads old tool box,probably from a model T or?

[madmike]

Hoppy Easter everybody