WBX 2.1 crank in T1 case options?

Here's the place for info on converting to a Type V motor!
H2OSB
Posts: 665
Joined: Mon Aug 21, 2000 2:01 am

Re: WBX 2.1 crank in T1 case options?

Post by H2OSB » Thu Nov 28, 2019 5:32 am

Lament may have been too strong a word. Is there a reason to not turn the no. 1 main bearing journal down to the 55mm T1 size?

H2OSB

H2OSB
Posts: 665
Joined: Mon Aug 21, 2000 2:01 am

Re: WBX 2.1 crank in T1 case options?

Post by H2OSB » Sun Dec 01, 2019 9:18 pm

Anyone?

Bruce2
Posts: 6927
Joined: Sat Oct 13, 2001 3:01 am

Re: WBX 2.1 crank in T1 case options?

Post by Bruce2 » Mon Dec 02, 2019 4:48 am

sideshow said it. The OD of the 5 bolts holding the flywheel on won't fit in a 55mm circle.

H2OSB
Posts: 665
Joined: Mon Aug 21, 2000 2:01 am

Re: WBX 2.1 crank in T1 case options?

Post by H2OSB » Mon Dec 02, 2019 8:36 am

Ah, ok. I didn't understand.

Thx
H2OSB

Post Reply