New IDF pattern Induction

[Paul H]

Got a few of these injector bodies and pressure chambers ready to go
Basically IDF throttle bodies without the throttles.
48mm bores
Polished ally cans with end cap (not welded)
O ring sealed spigots and clamps.
14mm injector bore with 6mm bolt holes nearby
No fuel rails available at the moment

Use with centre mount single throttle or whatever

£160 inc vat
or
$205

[MarioVelotta]

Hey Paul, nice as always. Do you plan on offering these with throttles at some point?

[Piledriver]

Hey Paul, nice as always. Do you plan on offering these with throttles at some point?

...Possibly in <48mm size?

[Paul H]

Yes they will be available as throttle bodies very soon
38mm through to 54mm
The smaller sizes have a venturi shape so they will blend nicely to the generic 48mm manifolds.
Injector ports are moved inwards to get a straighter shot down to the port on a type 1
They are also shorter than IDF's giving more room for induction devices and hood clearance on V8's