Bought system from Alpha Fab, talked & emailed with Shaun was "sending" a new computer. Never showed up, now won't respond. This has been going on 4 months...
Long story short I get a dead throttle pedal upon acceleration under load.
I have a coil on plug 2.2, E67 ECM with DBW pedal
VIN is from '07 Saturn ION that ran the E67
Codes that are always there are P0102, P0650 & I get P0606 when the pedal goes dead. Take battery cable off it will reset, but just happens again
I have a copy of the tune from EFI Live
I've been told the ECM could be bad, tune could be shot, etc. Anyone able to help?
UPDATE :They took care of it (Need help with ecotec E67 2.2 dead pedal - Alpha Fab won't help...)
-
flinttownchopper
- Posts: 2
- Joined: Wed Nov 21, 2018 5:51 am
UPDATE :They took care of it (Need help with ecotec E67 2.2 dead pedal - Alpha Fab won't help...)
Last edited by flinttownchopper on Mon Dec 31, 2018 3:25 pm, edited 1 time in total.
-
jt1967
- Posts: 383
- Joined: Sun Jul 29, 2012 6:13 am
Re: Need help with ecotec E67 2.2 dead pedal - Alpha Fab won't help...
Call either CBM or Turnkey they will be happy to help.
Turnkey 760 966 2663
CBM 909 291 7550
Turnkey 760 966 2663
CBM 909 291 7550
-
flinttownchopper
- Posts: 2
- Joined: Wed Nov 21, 2018 5:51 am
Re: Need help with ecotec E67 2.2 dead pedal - Alpha Fab won't help...
So I just got a new computer and harness from Alpha, he made it good
-
woodsbuggy1
- Posts: 823
- Joined: Sun Feb 20, 2011 5:15 pm
Re: Need help with ecotec E67 2.2 dead pedal - Alpha Fab won't help...
Might want to change your thread if they took care of you. 
Good quality is getting harder and harder to find.