250HP+ 1600DP Mouse Motor

MarioVelotta · Post by **MarioVelotta** » Sat Nov 21, 2020 11:03 am

It took 6 months but my dyno is online and I can continue with my 1600 turbo project!

V8Nate · Post by **V8Nate** » Sat Nov 21, 2020 11:44 am

Great job Mario!

MarioVelotta · Post by **MarioVelotta** » Tue Nov 24, 2020 5:02 pm

And the boosted 1600 is on the stand and making good power before adding a turbo

Clonebug · Post by **Clonebug** » Tue Nov 24, 2020 5:46 pm

MarioVelotta wrote: ↑Tue Nov 24, 2020 5:02 pm And the boosted 1600 is on the stand and making good power before adding a turbo

Oh Yeah!!!!!! Me likey!!!!!!

Kalle · Post by **Kalle** » Fri Nov 27, 2020 1:28 pm

That is a really nice result and a fair bit more than mine produced NA. 400hp should be within reach.

Keep on with the good work mister!

-K-

MarioVelotta · Post by **MarioVelotta** » Fri Nov 27, 2020 1:30 pm

That is great to hear!! I need to pull the heads and check the rings, it has a considerable amount of blowby already with low compression. So the number should move up once that is taken care of. My cold compression is 70, 75, 85, 105

Kalle wrote: ↑Fri Nov 27, 2020 1:28 pm That is a really nice result and a fair bit more than mine produced NA. 400hp should be within reach.

Keep on with the good work mister!

-K-

Schweg · Post by **Schweg** » Fri Nov 27, 2020 4:10 pm

Hope it’s an easy fix but excited to see the results/progress.

panel · Post by **panel** » Fri Nov 27, 2020 6:46 pm

Kalle wrote: ↑Fri Nov 27, 2020 1:28 pm 400hp should be within reach.

F%#k yeah

MarioVelotta · Post by **MarioVelotta** » Fri Nov 27, 2020 6:53 pm

Stripped the easy stuff off tonight.

Loving my setup and I look forward to using it a bunch

20201127_185026.jpg

20201127_185057.jpg

panel · Post by **panel** » Sat Nov 28, 2020 4:14 pm

You should buy one of these: http://thedubshop.com/mini-cam-sync/

Chip Birks · Post by **Chip Birks** » Sat Nov 28, 2020 4:43 pm

panel wrote: ↑Sat Nov 28, 2020 4:14 pm You should buy one of these: http://thedubshop.com/mini-cam-sync/

Out of stock!

buguy · Post by **buguy** » Sat Nov 28, 2020 5:33 pm

Oh snap!

Chip Birks · Post by **Chip Birks** » Sat Nov 28, 2020 5:55 pm

I have a spare I could be pursuaded out of though...

MarioVelotta · Post by **MarioVelotta** » Sat Nov 28, 2020 9:08 pm

Chip Birks wrote: ↑Sat Nov 28, 2020 5:55 pm I have a spare I could be pursuaded out of though...

I've got my own

panel wrote: ↑Sat Nov 28, 2020 4:14 pm You should buy one of these: http://thedubshop.com/mini-cam-sync/

MarioVelotta · Post by **MarioVelotta** » Sat Nov 28, 2020 9:12 pm

Surgery today

-

20201128_210921.jpg

Shoptalkforums.com

250HP+ 1600DP Mouse Motor

Re: 250HP+ 1600DP Mouse Motor

Re: 250HP+ 1600DP Mouse Motor

Re: 250HP+ 1600DP Mouse Motor

Re: 250HP+ 1600DP Mouse Motor

Re: 250HP+ 1600DP Mouse Motor

Re: 250HP+ 1600DP Mouse Motor

Re: 250HP+ 1600DP Mouse Motor

Re: 250HP+ 1600DP Mouse Motor

Re: 250HP+ 1600DP Mouse Motor

Re: 250HP+ 1600DP Mouse Motor

Re: 250HP+ 1600DP Mouse Motor

Re: 250HP+ 1600DP Mouse Motor

Re: 250HP+ 1600DP Mouse Motor

Re: 250HP+ 1600DP Mouse Motor

Re: 250HP+ 1600DP Mouse Motor